DUMPS - having t1 + t2 without a pin, is it possible to earn money?
- Thread starter kubag2
- Start date
Mommylover67
BANNED
- Messages
- 5
- Reaction score
- 0
- Points
- 1
No. If you have only both tracks they’re used for instore goods that require you to swipe the card, Can’t withdraw
Carding
Professional
- Messages
- 2,871
- Reaction score
- 2,377
- Points
- 113
You cannot withdraw money from an ATM without a PIN code with these data.
To get money using track1 and track2, you need to follow these steps:
1. Prepare a blank magnetic stripe card.
2. Check the validity of this data on any reliable checker that does not kill the card.
3. Make sure that the bin is not region-locked. Or you will have to use it only in the country of the cardholder.
3. Record track1 and track2 on the card using the cardpeek program (available for free download) or work with any other software you like best.
4. Put graphics, embossed and hologram on the card so that it looks like real and is believable (this is pathetic, but not necessary).
5. You buy expensive things in real stores, where the pos-terminal does not require entering a pin-code. Most terminals for speed of use and convenience do not require entering a pin code for small transactions.
You can try different stores, if suddenly you are asked to enter a pin code, inform that you have forgotten it and leave the store.
In practice, I noticed that in stores of expensive, elite, branded clothing, such as Gucci in Europe and the United States, when buying up to $ 10k, they never asked me to enter a pin code. It was enough to swipe the card in the pos-terminal and the payment was successful. Similar actions for large purchases in grocery stores where pin code input is not required.
6. You sell the purchased new expensive goods at online auctions or through bulletin boards for 70-80%. You get paid for them in any convenient and preferred way. I recommend working with cryptocurrency to achieve better anonymity and security.
By following these simple steps, you can easily get money using this data.
P.S. To protect yourself, you can make purchases using the drops from buyers-service (mules), who will go shopping for you and make purchases, and then pay you % for the goods, for example, in bitcoins.
But in this case, it will be difficult to control what exactly they bought and for what amount.
You can also record this data for contactless payment, which is much easier and more convenient. This does not require a blank card. You can buy expensive equipment and electronics and without pin code through the application just by being near the payment terminal.
In many stores there are no security guards or cashiers at all, you just pick up goods for any amount and walk with it near the checkout. It's just cool and wonderful.
There are a lot of dump sellers on the market and their databases are constantly updated.
Dump + pin for withdrawing from ATMs can only be purchased from private sellers. Their material is in great demand and the queue to receive it stretches for several months. They have no problems in demand and sale, since they themselves easily record and cash them without having to sell such tasty and valuable material.
Do not hesitate to buy this data that is offered by a bunch of scammers without reviews and without recommendations, you will simply be deceived, you will be very upset and disappointed.
I wish you success and productive work. Please ask any questions about this topic, I will be happy to answer and help you.
To get money using track1 and track2, you need to follow these steps:
1. Prepare a blank magnetic stripe card.
2. Check the validity of this data on any reliable checker that does not kill the card.
3. Make sure that the bin is not region-locked. Or you will have to use it only in the country of the cardholder.
3. Record track1 and track2 on the card using the cardpeek program (available for free download) or work with any other software you like best.
4. Put graphics, embossed and hologram on the card so that it looks like real and is believable (this is pathetic, but not necessary).
5. You buy expensive things in real stores, where the pos-terminal does not require entering a pin-code. Most terminals for speed of use and convenience do not require entering a pin code for small transactions.
You can try different stores, if suddenly you are asked to enter a pin code, inform that you have forgotten it and leave the store.
In practice, I noticed that in stores of expensive, elite, branded clothing, such as Gucci in Europe and the United States, when buying up to $ 10k, they never asked me to enter a pin code. It was enough to swipe the card in the pos-terminal and the payment was successful. Similar actions for large purchases in grocery stores where pin code input is not required.
6. You sell the purchased new expensive goods at online auctions or through bulletin boards for 70-80%. You get paid for them in any convenient and preferred way. I recommend working with cryptocurrency to achieve better anonymity and security.
By following these simple steps, you can easily get money using this data.
P.S. To protect yourself, you can make purchases using the drops from buyers-service (mules), who will go shopping for you and make purchases, and then pay you % for the goods, for example, in bitcoins.
But in this case, it will be difficult to control what exactly they bought and for what amount.
You can also record this data for contactless payment, which is much easier and more convenient. This does not require a blank card. You can buy expensive equipment and electronics and without pin code through the application just by being near the payment terminal.
In many stores there are no security guards or cashiers at all, you just pick up goods for any amount and walk with it near the checkout. It's just cool and wonderful.
There are a lot of dump sellers on the market and their databases are constantly updated.
Dump + pin for withdrawing from ATMs can only be purchased from private sellers. Their material is in great demand and the queue to receive it stretches for several months. They have no problems in demand and sale, since they themselves easily record and cash them without having to sell such tasty and valuable material.
Do not hesitate to buy this data that is offered by a bunch of scammers without reviews and without recommendations, you will simply be deceived, you will be very upset and disappointed.
I wish you success and productive work. Please ask any questions about this topic, I will be happy to answer and help you.
Carding
Professional
- Messages
- 2,871
- Reaction score
- 2,377
- Points
- 113
This limit of restrictions applies only in your country to cards that are serviced by issuers issued in your country.
They do not apply to payments made with international cards.
To bypass it, use dumps of another country without blocking by region.
There are also old pos-terminals, by swiping a card with a magnetic strip on which it is not possible to enter a pin-code due to technical features, since there is no keyboard for these purposes. They are usually used by private small shops, cafes and restaurants, as they are cheaper than conventional information readers.
You can first search for them, paying attention to which terminal is used in the store.
Or make small purchases that do not require entering a pin code, i.e. repeat the procedure up to $ 25 until the card is blocked or the balance runs out.
It is advisable to wait some time after repeated transactions, at least 20 minutes.
It is also necessary to make payments in different stores, and not in one terminal, so as not to cause spoilage.
That is, you bought it for 15-24 dollars, go to another store and pay again, and so on.
You cannot purchase dumps + pins. Think for yourself, why would hackers sell them? They can be easily recorded and cashed at an ATM, having received a full balance, or you can use the services of reliable cashing services to avoid risks. They are sold only by scammers, as well as offers for ready-made cloned cards or any similar types of cards with a balance and a pin. If you see such an offer, beware and do not make deals, otherwise you will simply be deceived, you will lose your money and be very disappointed.
I know of 2 reliable dump + pin vendors. They constantly have fresh material. But they are in great demand and in order to get track2 + pin, you need to wait several months, while there is an opportunity to purchase only such types as standard or classic cards, since they usually have a small balance and they simply do not need them, they do not represent a large values and do not arouse interest. The dump price for such cards can be $ 25-100, despite the fact that the balance on them may be completely absent, when a block is set in the region or it turns out to be less than the purchase cost. As the proverb says - "the game is not worth the candle." Your efforts and efforts will be in vain and will not bring the desired result. The efficiency of purchasing such cards is extremely low and does not correspond to the declared value.
Nevertheless, these sellers will soon appear on our forum and will provide similar services if you so desire. At the moment, they do not need additional demand and they work in private mode on well-known CSU and vendorsname forums. Access to which can be very difficult to obtain, it can be done only on the guarantee of 3 project participants or on the individual invitation of the administrators.
To get dumps with pins, you can purchase working wireless skimmers at Amazon or eBay auction. You need to independently install them on an ATM or, for example, on a terminal at a gas station, only after that you will be able to receive valid data that is transmitted over the Wi-Fi network, 4G or gprs to your device in automatic mode. Only then can you write them down and use them. But I do not advise anyone and do not recommend doing this, as it is very dangerous, you can be detained by the security service of banks or the local police, such cases are not uncommon and often happen.
They do not apply to payments made with international cards.
To bypass it, use dumps of another country without blocking by region.
There are also old pos-terminals, by swiping a card with a magnetic strip on which it is not possible to enter a pin-code due to technical features, since there is no keyboard for these purposes. They are usually used by private small shops, cafes and restaurants, as they are cheaper than conventional information readers.
You can first search for them, paying attention to which terminal is used in the store.
Or make small purchases that do not require entering a pin code, i.e. repeat the procedure up to $ 25 until the card is blocked or the balance runs out.
It is advisable to wait some time after repeated transactions, at least 20 minutes.
It is also necessary to make payments in different stores, and not in one terminal, so as not to cause spoilage.
That is, you bought it for 15-24 dollars, go to another store and pay again, and so on.
You cannot purchase dumps + pins. Think for yourself, why would hackers sell them? They can be easily recorded and cashed at an ATM, having received a full balance, or you can use the services of reliable cashing services to avoid risks. They are sold only by scammers, as well as offers for ready-made cloned cards or any similar types of cards with a balance and a pin. If you see such an offer, beware and do not make deals, otherwise you will simply be deceived, you will lose your money and be very disappointed.
I know of 2 reliable dump + pin vendors. They constantly have fresh material. But they are in great demand and in order to get track2 + pin, you need to wait several months, while there is an opportunity to purchase only such types as standard or classic cards, since they usually have a small balance and they simply do not need them, they do not represent a large values and do not arouse interest. The dump price for such cards can be $ 25-100, despite the fact that the balance on them may be completely absent, when a block is set in the region or it turns out to be less than the purchase cost. As the proverb says - "the game is not worth the candle." Your efforts and efforts will be in vain and will not bring the desired result. The efficiency of purchasing such cards is extremely low and does not correspond to the declared value.
Nevertheless, these sellers will soon appear on our forum and will provide similar services if you so desire. At the moment, they do not need additional demand and they work in private mode on well-known CSU and vendorsname forums. Access to which can be very difficult to obtain, it can be done only on the guarantee of 3 project participants or on the individual invitation of the administrators.
To get dumps with pins, you can purchase working wireless skimmers at Amazon or eBay auction. You need to independently install them on an ATM or, for example, on a terminal at a gas station, only after that you will be able to receive valid data that is transmitted over the Wi-Fi network, 4G or gprs to your device in automatic mode. Only then can you write them down and use them. But I do not advise anyone and do not recommend doing this, as it is very dangerous, you can be detained by the security service of banks or the local police, such cases are not uncommon and often happen.
Carding
Professional
- Messages
- 2,871
- Reaction score
- 2,377
- Points
- 113
Usually, blank track recording cards are sold without embossing, holograms and graphics.
Graphic images can be applied using a special card printer.
A large selection of models is presented in the Amazon store and at the eBay auction for every taste and color. For these purposes, a used device is also suitable, the main thing is that it performs its necessary functions and is in a completely serviceable functional state.
If you do not want to pay for your hard-earned money, then this printer can easily be carded.
Holograms are also sold, you can buy them inexpensively and just stick on the card, but they are not at all necessary, as well as the embosser - an embossing device that squeezes out the numbers of cards.
It is quite possible to do without this, since many types of cards, such as Visa Electron and various prepaid options, do not use embossing at all, so this is not required at all.
Nevertheless, if you definitely need drawing, then you can contact any nearest printing house or order graphics from an online printing house. They will do their job and send the cards to the correct address. Usually their services are not that expensive.
I advise you to do without this, you can carefully stick any sticker, and you do not need to apply graphics.
As a rule, tellers and cashiers do not peer at the image on the card, but the very fact of payment is important to them, so you can cover most of it with your hand so that it is not very visible and noticeable. Under such circumstances, they will not be able to detect that a regular sticker is stuck or not at all. At the same time, you can distract them with a conversation so that they do not pay additional attention and are not too vigilant and suspicious.
Do not forget that when paying by contactless method, presenting a card is not required at all, this is the best way out and an option for successful work.
needs a nfc writer right? Is the MSR605X alone enough?
Carding
Professional
- Messages
- 2,871
- Reaction score
- 2,377
- Points
- 113
Recommend MCR200 device and EMV software are required to record tracks 1 and 2 of the dumps. Encoder MSR605X is also suitable for these purposes.
For details on how to correctly record data, see this topic:
Как записать треки 1 и 2 дампов c пином и без на карту
Привет, начинающие кардеры! Сегодня я расскажу, как правильно записать треки 1 и 2 дампов с PIN-кодом. Я также представлю шаги по созданию трека 1 из трека 2 для тех, кто уже понимает написание треков CC. Я знаю, что вы не понимаете, что означает трек. Треки 1, 2 и 3 это цифровые дорожки...
carder.market
dunkelh3it
BANNED
- Messages
- 547
- Reaction score
- 1,121
- Points
- 93
- Telegram
- @Dunkelh3it
I don't believe credit card chips can be copied and rewritten.
The healthiest thing is to reuse the copied data by writing it to another card's magnetic field.
PS: My personal opinion.
The healthiest thing is to reuse the copied data by writing it to another card's magnetic field.
PS: My personal opinion.
Legend2000
Member
- Messages
- 26
- Reaction score
- 9
- Points
- 3
@Carding can I write track 1 and 2 unto chip card using MSR605X USB Card Reader Writer and be able to use it in POS swipe for purchase?
I dont intend to cashout from ATM. Thank you .
I dont intend to cashout from ATM. Thank you .
