First Plug in your Omni key and msr, plug card into Omni key.
Open JCOP and delete JCOP files, close out of JCOP and open back up. Enter your track in track number then hit format Jcop file, then click save but make sure you have it on the right script(Visa Credit, Master Credit, Amex Credit, Or Debit)
After Than Go Open ATR TOOL, Enter Your Reader(should be plugged in still) then go to your Java Card On ATR and select your type of card, I use Jcop40 so it would be J2A040. Then where it says DEFAULT you will click it and find the bank and card you are trying to write from your BIN and then set your ATR.
After you set your ATR go to Cardpeek and press ok, then select analyzer(select ATR) Make Sure The ATR is changing if it’s not changing keep trying to set it or go with a different bank as in if it was CHASE then just look up another CHASE in the default option on ATR TOOL.
After you do that open X2(this is the most important part) Click EMV, fill out all cards details, with Visa you do not need a track1 so just hit spacebar on that. In the AID box place your code United States is always (31010) then in country code (0840) Enter your Pin for dump in pin box Example (1234) Currency Box Put (0840) and go down to expiration date and make sure that is correct you can find this in your track2.
Next go to (IST Load) box in X2.
Set your IST file same bin, if you don’t have any ist files you would have to have a same type of card with that been read it and save it and then generate IST. You Have To Match The Bin Of Your Dump.
After You match the bank you will go back to EMV on X2, copy and paste what you put in there into IST Load, don’t fuck with track 1 if visa. Now keep X2 open cause we have to get you 3 ARQC’s.
Open up ARQC Gen now, you need you Pan (card number) you would take you first half of track 2 and place it in there, then go to Date(YYMMDD) on the right and place the date of the day you want to hit your dump, then change your country codes and currency codes to the same I told you earlier. Then Click (Generate ARQC) the first ARQC would be the second box code under (Generate ARQC). Now place that code in ARQC 1 on X2. Then go back to ARQC Gen and Find box (ATC):ICC and change the (0001) to (0002) then hit Generate ARQC place that code from the box we talked about earlier into ARQC 2 inside of X2 and repeat for the 3rd one (0003) generate and put code in X2 again. Then you would click burn in X2 and burn that mf. After you burn it go ahead and exit X2 and ARQC gen.
Now go back to cardpeek (accept all messages that pop up) go to Analyzer and select EMV once you do it should immediately start working, give it 5 minutes and once it’s done right click and select (Expand All) and then you will go through that and make sure all your info is correct, the expiration on cardpeek does not matter, because all that information is in the track2, just make sure tracks, pan and all info is straight. After you do that and made sure your chip is good now you can go ahead and open your MSRX, Enter your track2 where it’s supposed to go for track1 go to (track2to1.com) and generate a track one from your track2 and then you would select write on MSRX and swipe your card.
That’s how you write a dump.
Can buy software from me through shop or directly.
Open JCOP and delete JCOP files, close out of JCOP and open back up. Enter your track in track number then hit format Jcop file, then click save but make sure you have it on the right script(Visa Credit, Master Credit, Amex Credit, Or Debit)
After Than Go Open ATR TOOL, Enter Your Reader(should be plugged in still) then go to your Java Card On ATR and select your type of card, I use Jcop40 so it would be J2A040. Then where it says DEFAULT you will click it and find the bank and card you are trying to write from your BIN and then set your ATR.
After you set your ATR go to Cardpeek and press ok, then select analyzer(select ATR) Make Sure The ATR is changing if it’s not changing keep trying to set it or go with a different bank as in if it was CHASE then just look up another CHASE in the default option on ATR TOOL.
After you do that open X2(this is the most important part) Click EMV, fill out all cards details, with Visa you do not need a track1 so just hit spacebar on that. In the AID box place your code United States is always (31010) then in country code (0840) Enter your Pin for dump in pin box Example (1234) Currency Box Put (0840) and go down to expiration date and make sure that is correct you can find this in your track2.
Next go to (IST Load) box in X2.
Set your IST file same bin, if you don’t have any ist files you would have to have a same type of card with that been read it and save it and then generate IST. You Have To Match The Bin Of Your Dump.
After You match the bank you will go back to EMV on X2, copy and paste what you put in there into IST Load, don’t fuck with track 1 if visa. Now keep X2 open cause we have to get you 3 ARQC’s.
Open up ARQC Gen now, you need you Pan (card number) you would take you first half of track 2 and place it in there, then go to Date(YYMMDD) on the right and place the date of the day you want to hit your dump, then change your country codes and currency codes to the same I told you earlier. Then Click (Generate ARQC) the first ARQC would be the second box code under (Generate ARQC). Now place that code in ARQC 1 on X2. Then go back to ARQC Gen and Find box (ATC):ICC and change the (0001) to (0002) then hit Generate ARQC place that code from the box we talked about earlier into ARQC 2 inside of X2 and repeat for the 3rd one (0003) generate and put code in X2 again. Then you would click burn in X2 and burn that mf. After you burn it go ahead and exit X2 and ARQC gen.
Now go back to cardpeek (accept all messages that pop up) go to Analyzer and select EMV once you do it should immediately start working, give it 5 minutes and once it’s done right click and select (Expand All) and then you will go through that and make sure all your info is correct, the expiration on cardpeek does not matter, because all that information is in the track2, just make sure tracks, pan and all info is straight. After you do that and made sure your chip is good now you can go ahead and open your MSRX, Enter your track2 where it’s supposed to go for track1 go to (track2to1.com) and generate a track one from your track2 and then you would select write on MSRX and swipe your card.
That’s how you write a dump.
Can buy software from me through shop or directly.
Last edited by a moderator:
