Sooner or later, a turning point comes when you have already heard enough of all sorts of stories that real carding (hereinafter "RK") is the most pale, dangerous and kind of unstable topic in terms of security. Each of us is pushed to this step by our cockroaches in our heads. In general, you decided to shop. Flag in your hands and a tailwind in your pockets. Before I started my current direction, I worked for quite a long time, exclusively in the topic of RC. True, then there were other times, I lived in a different country, I was bold and self-confident, and the grass was then greener and the sun brighter. In general, based on my humble experience, I hasten to warn you against the simplest punctures and give simple instructions on how to behave in non-standard situations. Sit back and read, wagging.
1) First, you need to choose a country, because pooping where you live is bad manners, and our policemen are not there. They cunt you hurt, in the kidneys, and even on the head, laughing and cheerfully, they will knock your testimony out of you, and then you will find out on TV who killed Kennedy.
The country should be high-tech, a little fucking and not a third world. I strongly advise you not to go shopping in Bangladesh or Iran. I will not say where I went, so as not to burn Mecca of suckers and naughty naive Nanai boys.
2) There must be at least two escape routes from the country. I usually fly there by plane, and get back by sea. On the plane and the customs are meaner and there are more hi-tech cunning bath devices. Check into a hotel or by scanning a passport made at home on the left data or by any means try not to show your real ID. If you settle on a copy, argue that you are in a foreign country and handed over your passport to your travel agent, because you are afraid to lose it. Stay exclusively in inexpensive motels, it's easier there. Change your motel once a week. And, of course, we don't card the motel. No fanaticism, comrades.
3) We buy dumps. Everyone says that dumps of Europe are better, I will not argue with anyone, but that for me - this statement is not very true. American dumps shoot no worse, here, of course, a lot depends on the country, that is, it may stupidly stand the region lock of the very country where you are going to shop. You can't guess here. For successful and fruitful work, I take VISA / MC CORPORATE / GOLD and MC WORLD, this material has always shot, and will shoot. I advise you to keep statistics on what limits are on the card. In most cases, GOLD / CORPORATE allows you to withdraw 500 raccoons for a tranche abroad, BUT this is not always the case. So try it. MC WORLD and INFINITY dumps are not limited at all. That's why it's called WORLD.
3) Find blanks or make them yourself. If you have a printer and an embosser, then I have nothing more to say. If not, then we find salary-type blanks so that the actual card number is not stamped on the card, but there are 4 digits with the holder's surname. This option is what you need. I had to sweat for a long time, BUT everything will be exactly in the end. If possible, look for blanks that have not yet expired their printed expiration date.
4) We write a visa dump for a visa, for a master, a master. It's a trifle, but I got it wrong once.
5) Choosing a shop. It should be at least a couple of three kilometers from the place where you live, the seller should be, if possible, a woman, it's easier with them.
6) If you are with a partner, leave him on the street and then let him come after a while, pretending that he does not know you, if a non-standard situation arises, he will be able to pay for you, saying, for example, that you live in 1 hotel. Here at your discretion. You don't have to ask him to come in at all.
7) You must ALWAYS have an amount equivalent to the purchase price in your wallet. If it suddenly starts something pale - ALWAYS PAY CASH and pretending to be dissatisfied, eat it quickly.
8) NEVER BE NERVE. I always stand near the village and imagine the sea or a meeting with a pleasant person. It won't work right away, but try to hide your emotions. Smile. Dress expensively, but not provocatively. Buy glasses with 0 lenses. Glasses inspire confidence. Speak little and to the point.
9) Making expensive purchases.
Jewelry requires a special approach. She needs to be fed. We go to the shop, we are interested in jewelry, we measure it, pretend that we really liked the product, we climb into the shovel and say that you do not call attendants, but you are now going on an excursion / funeral / to the village to see your grandfather and upon arrival, if you don’t forget to you will return to them. In short, he does everything to be remembered. At the same time, ask if they accept cards and tell how much your wife will scold you for spending so much money. After 3-4 hours we go there again and calmly leave the happy owner of the gold jewelry. All jewelers love cash a lot, so take a look at the situation. Be sure to bargain and ask for a discount.
10) Expensive things and equipment. There are no problems with things at all. I tried it on and bought it. Choose shops where the sellers are girls with whom you can have a nice chat and win over. The stronger your contact with the seller, the less likely he will not even look at the map. Don't poke your nose into mega-brand boutiques like Prado and Louis Vauton. There, the sellers are trained, because they work with foreigners.
Technology - you have to be careful here, because the people who sell equipment and computers are well-trained and in most cases they whip the trick on how to work with the card correctly. Look at the situation, and buy goods up to 1k raccoons.
11) Universal rules. Before making a purchase, always observe the cashier and see HOW he serves other customers; what he pays attention to when they pay by card. Try to buy something cheap for a start, for 100 bucks, look at the process and fuck it to the fullest. Well, about cash in the case of pale, I have already spoken. Never carry all your blanks with you. Use 1 card per day, because the fewer cards you deflow, the less the likelihood of a palette will occur. One card can live for quite a long time and give its limit per day. The more cards you start using, the more banks will start sounding the alarm. Carry 2 cards and cash with you. One didn’t pass the other, a friend didn’t go through, or he dumped, or if a particular thing is pale and the seller starts to boil, he shoved him the cash and dumped it. Nal solves all problems - proven, BUT this is the most extreme way. If any problems begin, the MOST important thing is to take the card out of the seller's hands, just take it and pull it out, talking to the seller. Never leave stuff. Look for shops that don't have an electronic lock on their doors. Now these are very popular. The doors are locked from the remote control. Oh, never go to the same store twice. Even if the card is not blocked. Minimize your risks. In such countries where I have worked A LOT of cameras, do not forget about the cap and glasses. Not sunscreens of course. Do not wear cap + glasses! Alternate. Change your clothes often. Don't wear the same one every day. In some cases, when buying, they require an ID, carry with you a printed copy of the passport, the left one naturally, arguing that you are afraid of losing and locked it in the safe in the room.
12) Non-standard situations arising at the time of the acquisition of things.
a) We run out of loot on the card, tulip a card to a friend or refuse / pay in cash. Here, according to the situation
b) The limit is exceeded, see point a)
c) The card is stolen (code 06, if I'm not mistaken), we complain to our bank that issued the card and sin that it is used abroad and the bank has blocked it. Pretty wet code, they can get fucked. The main thing is not to worry, TAKE the card from your hands, then according to the situation. If the case smells like kerosene, then eat or tulle another card. The main thing is not to be nervous. I tell myself that this is my real card. It's easier.
d) The numbers on the card and check do not match. Usually they are not looked at at all if the tranche has passed. The seller, believe me, I am not less satisfied than you. He sold a lot of goods and at a high price. But if suddenly this happened, I excuse myself saying that it is possible some kind of banking error and that the card is shooting in another country by issuing a different code, I spread my hands in surprise and promise to call the bank in the morning and find out the reason. That is why I asked to use only salary cards, there is no number there. I have little experience here, but the above version gave a ride with a bang.
13) In the room, unpacking things, tear off all the price tags, throw away all receipts, and throw away the boxes and packages yourself, without leaving the cleaning lady.
14) Try not to card any kind of attractions with Disneylands, that is, places where you will be for more than 1 hour in an enclosed space.
15) In the evening, after a successful shopping, sit somewhere in a bar. Find bars where you pay in cash, it is indecent to burn on a 20 bucks glass of whiskey.
16) Don't poke your nose into the casino. Tales about how in a casino you can get cash out up to $ 500 without documents, or buy chips and play a little bit to exchange fairy tales for loot. I do not advise. There is 1 sq. meter in three, or even 4 cameras. Far from being fools work there. So do not be impudent.
17) We leave the country by another type of transport, where you leave the ship or leave by bus - do not card ANYTHING, spend exclusively yours! Customs when you leave the country are kind and welcoming. Bring at least 35 kg of cannabis. It doesn't give a fuck about them anymore. Let them out, but agree with ours. You can import 35 kg + 2 liters of alcohol and a couple of blocks of cigarettes into the RU. The overweight is 4 euros per kilogram. We practically do not weigh anything if the bag is not visually huge. So take it and don't worry. I was carrying a kilogram of 60, not fucked up. Although even if they do it, I think everyone will find it to pay 4 euros per kg.
Happy shopping.
In posah, as in Auchan, there is a bypass three times, insert the back side not with a chip but with plastic, after the third error, the picture on the display changes to hold a magnetic tape, and despite the fact that the card with the chip, the purchase will pass. I think he knows the methods of anonymity, a mask, glasses, disposable clothes from the garbage, no phones. You can fill in the dumps on any old, both bonus and bank cards where there is a magnetic stripe, even from a sportsmaster, that is, they go as balvans. Balvanks are also sold on Ali with encoders, just enter the model and do not forget about cashback, coupons and refund
Verifon terminals. Workers connected to existing EU firms. After 3 chip errors, the card with the chip is sent to the strip + pin code. And voila, the transaction is confirmed and the fiscal receipt. It is clear that the bins are only EU, but it turns out that 201 will also fill up and how to
shove the card 201 with the other side of another emitter into the terminal of another emitter 3 times, waited for the inscription "stretch to ..." held out + pin and the transaction goes through. The holder test was for a bin of the same country as the village. But at the same time, the holder is traveling but very rarely calculated with a test card in the testing region. It is clear that the lok region disappears here, but this is how the mechanism works.
NFC write is the same method of transferring data from a chip. Well, yes, you can copy the transmission signal and then play it back, but this trick works only at certain payment points that support MSD. You can also extract the card number and the date of validity from this signal. You can also broadcast this signal and carry out the so-called release attack. Well, it seems like Samsung tokens can be copied!
how to do it in Belgium
There is a city of Antwerpan, a city of diamonds, drugs and prostitutes and a lot of emigrants. Everything can be found in this cursed city. And so, for a start, we need an encoder dump and plastic (we buy it on the internet), but initially we
buy an ID card
We buy it from drug addicts near the central railway station in Antwerp,
a person about your age, not a native Belgian atom, burn because you don't know the language well (you need to know a little language, at least English) order plastic in this name and after giving the narik's data order the same ID card but with your photo, she also rides on white blank with a chip, we need this so that the royal security number matches, now you are not Vasya Pupkin but some kind of Stefan van de Bosch))) or even better, a Turk born in belgium Yes, you still need to ask the narik for the full address of his registration, why? I'll tell you later)))
Then we take the dumps and roll them on plastic, in my experience, Japan, Brazil, Israel, Argentina, yusa will fill up well, but quickly die
. Stefan van de Bosch (software available)
Important: clothes should be branded, but not too conspicuous, you must behave calmly and always smile, be polite, merge with the crowd.
Now we rent a shopping car for a week, preferably in a small company not in Avis and Citikar! It is undesirable to shop in big cities !!! It is better to go to the villages, It is not advisable to shop in large shops where there is a guard !!! And in small boutiques where there are 1-2 saleswomen, so that if something goes wrong, they will apologize and leave. Going to the store, nodding politely to the saleswoman, assess the situation, the presence of cameras, security, how many people are inside, look at the goods in parallel (the easiest way is to buy clothes, cigarettes , alcohol, it is possible and electronics iPhones Notebooks, but this is more difficult, at first it is better to abstain) in a few minutes this sponge will come up to you and offer its help, you should already decide on the purchase, but I would like to buy a Notebook, but I do not know what will suit me , she will ask you for home or work, in short, lead her by the nose, pretend to be a fool, do not choose the expensive, she herself will try to sell you the most expensive, sigh when she announces the price, reluctantly agree, ask about the guarantee, tell me you would like to buy it, but do not remember the balance of the card (insurance if the card does not give you) go to the poster terminal, take out the partmone, you strike the card with a card and immediately back to the partmon, there should be 2-4 cards similar, if not, say why for bullshit, try again and quietly take another card (several attempts) pay off, sign on the check , gladly that I had enough money, you shouldn't be nervous !!! thank and leave. you strike the card with a card and immediately back to the partmon, there should be 2-4 cards similar, if not, say why for bullshit, try again and quietly take another card (several attempts) pay off, sign on the check , gladly that I had enough money, you shouldn't be nervous !!! thank and leave. you strike the card with a card and immediately back to the partmon, there should be 2-4 cards similar, if not, say why for bullshit, try again and quietly take another card (several attempts) pay off, sign on the check , gladly that I had enough money, you shouldn't be nervous !!! thank and leave.
The card did not give possible options or gave out a pickup, etc. You are outraged, they say, the card is okay, this is your left, if she starts calling the number pasted on the pose, 98% will not get through, it is better to leave in this case ask for a card, they say you will withdraw cash at the bank around the corner and come and pay, if you don’t give it back, just calmly leave, and blame the city right away !!!!
It is better to have a buyer for the staff in advance. The easiest way is to buy cigarettes and alcohol, packs and Indians immediately buy up in order to resell in their store the price of Marlboro 5 euros per pack Pak will give you 4. Buying 10 blocks for 500 you get 400 clean exhaust. Varian with an iPhone you buy for 700, sell for 60% and you have to look for a buyer, and it is more difficult to buy at times, an option with clothes, size, color, brand and sale for 30-40% This is me I say if you sell in belgium!
In short, see for yourself according to the situation and connections, you can sell clothes and electronics to Jews in jewelry stores near the same damn station.
Now sweets: food, gasoline, clothes for yourself, all for dumps.
Hikes to the streets of red light districts too, that is, you go to a prostitute, she will serve you, you tick on the poo and sign on the check, you leave)))))
train trips, I even paid for a dead card, you calmly sit on the train and wait for the conductor, seeing him from afar, you rush to him, Monsieur help, I was late did not have time to buy a ticket at the box office, what should I do aaaaa, he says they say everything is ok, you can buy it from me, but a little more expensive.
This DEER has an apparatus in his hands, he strikes a card on it and displays a ticket in the form of a check and gives you the card, but the trick is that his chumadan is not connected with the Internet, he just reads the dump and that's it, they try to withdraw money after arriving at the
To station there is a carriage restaurant at your disposal whiskey, champagne and a trip to Paris in first class
And the last thing: why we needed the address of a drug addict, you can go to all banks, open a bank bank on your Id card and then accept bays, they send a card to the address, and take a pin in the bank, or vice versa, but you can always come up with a story that they say you don't live at the old address, looking for an apartment, but right now, you live with friends, is it possible to pick up the card and pin here in the bank (I was rolling it on the docks because you are a citizen of the kingdom) I
almost forgot from the same Jews you can cash out for% you strike for 8k it I counted you on the spot and you left. There are a lot of such shops, as a rule, Turks, Arabs, and people from the CIS.
In general, I wrote the article for the first time purely for acquaintance, everything that was written from my life experience !!! The topic works in BU, FR, NL, Luxembourg in Germany, everything is more complicated already under tired, in general, in recent years, Lithuanians, Ukrainians and Romanians have pulled up tightly in this topic. Armenians all shops with perfume are tired. In any case, each city has its own nuances.
Scheme of assembling radio chips from Eva
So, we decided to create a skimmer that transmits sound and pins over the radio channel.
The scheme of work for us will be as follows:
The sound is removed from the magnetic head and transmitted over the FM range to any receiver (for example, an mp3 player that can write a radio or a car receiver for many hours in a row). The signal from the pin-pad will be transmitted in the same way, only instead of the head there will be a tone dialing generator.
As a result, we will get two records - the first will have sound with dumps that can be sent for decode to some service (cunning Eva XD), and the second will have beeps (do-re-mi-fa-sol-la-si) , where a specific number will correspond to each note. And any musician will guess the pin code from four notes)))) Well, or in the sound editor, open it and see what kind of number is under this or that tone. More on this below.
We will need:
Two radio transmitters (done in the first step).
Tone generator (done on the second).
Two radios with signal recording function (buy a player for 1000r and don't worry).
First. We make transmitters.
For the transmission you will need:
The coil is made independently. We take a PEV0.5 wire (just a copper wire 0.5 mm in cross-sectional diameter), wind it on a cylindrical object with a diameter of 5 mm. 5 turns. Then we take out the item, and fill the coil with hot melt glue.
Antenna - remnants of a wire of 5-10 centimeters of arbitrary shape.
Battery tablet (1.5 v) Power
button (big red XD)
Transistor KT3102 (in radio components they know what it is, it costs a penny)
Resistors for 3.3k, 10k, 1k (also pennies are in the same place)
Conders for 12n, 100n, 5p, 10p, 28p (I think there is no need to explain where to get it and how much it costs)
The wiring diagram itself (either print the finished one (link), or solder on the workpiece, scratching the tracks with a clerical knife, it costs 100r maximum)
Head for reading sound from an audio track.
Now we solder all this to the circuit.
The microphone in the diagram indicates the magnetic head itself (in another article, read how to strengthen it on the knees, but we hardly need it).
When assembling the second transmitter, the tone generator will act as the microphone.
So the guts for the dump transmitter are ready! In the third paragraph, we will configure them, but you can already mount them in the face!
Second. Putting together a tone dial generator.
We will need (all in the same radio parts, we don’t buy pies in the school cafeteria for a couple of days and save up for details):
10 buttons
1.5 V tablet battery (although it’s easier to use the same battery as the transmitter uses)
10 resistors for 20, 40, 60, 80, 100, 120, 140, 160, 180 and 200 k
Transistors KT315 and KT361
Conder for 50n
The wiring diagram will have to be done already on the pin-pad, because the buttons are scattered over the face.
so we solder! We put an opening key and one of 10 resistors under each pin-pad button.
The red triangle marks the radio transmitter. By the way, you can power on from the transmitter (boldly connect to the same battery in parallel), all the same, our pin-pad will work from one battery in the summer for two months))) But if the transmitter is crooked, then it will slightly change the transmission frequency for each button, so that on the diagram I added a separate battery for the tone generator.
Guts in the pin-pad now lie too, let's go yeah!
Step three. Customization.
If your hands are straight, then just turn on the transmitter and on the autosearch of frequencies you will catch your transmitter immediately. It didn't work out - we heat it up a little with a lighter with hot melt glue and change the distance between the turns of the coil. And if your hands are also golden and it turns out to tune both transmitters to the same frequency, then you only need one receiver and you don't have to synchronize in time from two audio tracks and we will get a pin just between the input and output of the card.
Be sure to listen and memorize the notes that correspond to each pin-pad digit. Well, or write it down in the editor, if the department "k" came to the ear in childhood)))
That's all! You are great!
You can now safely put the skimak for field tests in the conditions of the far north or harsh Africa, in order to have guarantees that the frequency will not go astray on the transmitter due to the thermal deformation of the copper coil! The maximum operating time for the skimmer has not yet been established. There is a possibility that he feeds on the holy spirit of Eve)))
Pros:
working time - up to two weeks guaranteed, but months (years?) - check it yourself.
security - in case of removing the skim dump from you.
small dimensions - you can wriggle everything into an inner rail to pack)
cheap manufacturing - the guts will pay off on average in 0.01 seconds of device operation))).
Minuses:
when changing the temperature regime, the slightest deformation of the coil knocks down the frequency. You have to periodically adjust the receiver. For example in the morning and evening. Or just make thermal insulation, but all the same, from room temperature to street temperature will slowly fall or rise)) the
radio transmission distance is up to 150 meters, but a high-quality signal in line-of-sight conditions is 30-50 meters, indirect - from 5 to 15 meters. You can sniff the receiver with a dictaphone behind the cornice next to it or stick it somewhere. Be smart, not all I think for you!
The radio transmission frequency will also drop as the battery is discharged, but in the field at a temperature of 20 degrees (and we all remember that in the cold, the battery capacity drops significantly) within two weeks the voltage from the battery did not drop so much that the transmission frequency would drop.
Many (especially beginners) are tormented by the question: "What guts should I put on my skimmer / device?" A lot depends on the answer to this question:
- Percentage of the count;
- Working hours;
- The quality and speed of the decode;
- Bypassing protection systems;
- Your progress on the "Real career ladder".
The intestines are the internal electronic part of the skimming device, which is responsible for processing and recording information contained on the magnetic stripe of a plastic card.
Audio.
Let's start with the classic audio guts. The principle of any audio guts is to record sound from magnetic tape on a credit card. Basically, the audio guts are a regular voice recorder that records the audio data coming from the audio head, which is located in the place of the microphone. Further, the audio data must be processed (decoded). The quality of audio data depends directly on the sampling rate. The process of decoding audio data depends on many factors and, in some situations, can be difficult. The time required to decode one audio track is from 5 to 30 minutes.
For the most part, the cost of these guts is low, about 10-50 dollars. The size ranges from 10x20 to 60x60mm. Nutritional intake is quite high compared to flare intestines. Usually there is enough memory for continuous recording. Many people choose audio because of its ability to decode in non-standard conditions (noise emitted by ATM; jitter; crooked holder). Most of the audio is not encrypted. As a rule, audio chips only read the second track.
Miniature dictaphones such as "Edic-Mini" can be used as guts.
Next, consider the radio guts.
The principle of operation of radio guts is based on a transmitter module that is inserted into the face and a receiver located near the ATM (usually a distance of 10 to 200 meters), i.e. consists of a "radio beetle" and a radio station with a dictaphone (a tablet or PDA is often used as a dictaphone). Frequency matching problems may occur depending on the type of transmitter. The receiver is often combined with a dictaphone, which records the received audio data. The big disadvantage of this type of intestine is radio interference, which can significantly complicate the reading.
The time required to decode one audio track is from 5 to 45 minutes. The cost of these guts will start at $ 100. Size from 5x10m to 10x30mm. Another unpleasant aspect of this type of gut is the extremely high consumption of food. They do not require strict conditions in the amount of transmitted data, because on the side of the receiver, you can put a voice recorder (or other recording device) with any amount of memory. You can buy it on "spy sites", radio amateur sites, carzh sites, radio markets.
Bluetooth guts are similar in action to radio guts.
They also have a receiving module that stores the received audio data. The intestines are made up of a bluetooth headset and a mobile phone (or tablet). A pleasant feature of these guts is the transmission of data in digital format, therefore they are not afraid of any interference. An unpleasant feature of these guts is a DSP processor that can filter data in real time (it is used by mobile device manufacturers to filter out various high-frequency noises and squeaks, such as wind).
The time required to decode one audio track is from 5 to 30 minutes. Old guts (Samsung WEP-410) lack DSP. The cost of these guts is from $ 100. The size of the transmitting module is from 10x20mm to 20x30mm. Power consumption is the same as that of radio guts. They do not require strict conditions in the amount of transmitted data. Reads noise and jitter just like classic gut audio. They do not have encryption.
Next comes GSM audio.
The principle of operation is based on two cellular telephones, one of which transmits audio data, and the second, in turn, records a telephone conversation in its memory. Some people use Chinese-made GSM bugs like N9 (GOOGLE: GSM bug N9). Guts, just like bluetooth, use a DSP processor.
The cost of these guts starts from $ 150. The time required to decode one audio track is from 5 to 45 minutes. Power consumption is large enough, close to bluetooth guts. Large sizes, in comparison with analogues from other categories of gut 50x50mm approx. Large food consumption. They do not require strict conditions in the amount of transmitted data. You can buy it on sites selling spy devices, Chinese sites, radio markets.
The last audio chips that I would like to discuss are "Spy devices", like pens with a built-in camera, key fobs, etc. The latest spy devices produced are of a sufficiently pleasant quality to work in skimmers, such as 2in1 (sound and audio are written in one muzzle), but the quality of performance itself suffers greatly. You can often find freezes, limited operating time (despite the large amount of memory up to 32GB), breakdowns. The time required to decode one audio track is from 5 to 30 minutes. Cost from $ 20.
Flash.
Although the principle of operation of guts is to receive audio data from a magnetic track, the end result of flash guts will already be, not audio data, but data in text format, the decoding of which has either already been performed, or it will take a little time to decode the entire dump. In addition, no special knowledge of the F2F decode is required.
The principle of flash guts is partial decoding of audio, namely, in determining the timings "on the fly". Typically, this is done with magtek hardware decoders (21006501-21006541). Operational amplifiers are less commonly used to determine timings.
The time required to decode one track is from 2 to 119 seconds. The cost of flash guts is an order of magnitude higher than audio. The cost starts at $ 200. Size from 5x7mm. An important factor in these intestines is the low nutritional intake of 0.2 mA. In "combat mode" they can work for 6-9 hours with a 6-9 mAh battery. There is enough memory for 500 or more dumps. Flash ones categorically do not tolerate Shumka, but they read jitter well enough. As a rule, all flash guts have built-in encryption, which is quite enough for renting a device, but absolutely not enough to protect against experts in the field of data decryption. basically it uses XOR-encryption, sometimes combined with "plus-minus byte" (ie, for example, we have the original text 123456, after this method the text will be 214365).
A radio flash differs from a conventional flash in that data is transmitted to a receiving module located near the ATM. Instead of memory, a transceiver microcircuit (or a similar module) is used, such as nrf24l01, which has its own digital data transfer protocol, which is not afraid of external interference. The cost of such guts will be from $ 300. size from 5x7mm. Power consumption is not significantly higher. than a regular flush (0.5 - 0.9 ma). The amount of memory is usually extremely large due to the fact that an external data reception module is used. All other parameters do not differ from the classic flush.
The essence of GSM-flash guts is to send dumps in the form of SMS messages. The transmitting GSM module itself is large, so it is located near the ATM, and data is transmitted to it via a radio channel. Those. GSM gut consists of a radio flash and a GSM module (which often includes mobile phones or tablets that process the received data and send them by SMS). The cost of such guts starts at $ 500 with a size of 5x7mm and a consumption like a radio flash.
Outroduction
RFID reader based on arduino up to 2 meters distance.
Electronic access keys and plastic cards have become part of our life. As it turned out, it is quite simple to read information from them. It is enough to use a small assembled device based on a microcontroller, an RFID tag reader and putting all this in a bag from under a laptop, calmly read information not only from electronic keys, but also information from plastic cards - those that are not with a chip, but with an electronic strip.
This device uses an Arduino Nano microcontroller, its power supply is 3.3 Volts. Any price can be used as an RFID reader, depending on the distance at which it can read. To read from a distance of two meters, its price will be about $ 400, if the distance is 20 centimeters, then the price is about $ 150.
In general, all parts can be bought online with home delivery. I will not indicate exactly where, but I am trying to say that it is quite unsafe to carry a plastic card with you even in an ordinary wallet or pocket. About electronic access keys, we can say that it is even easier to skip them, usually they are lying around anywhere on tables or near a computer.
The figure shows that the read information is saved on a usually card in the cards.txt file.
For this and a couple of other reasons, I carry plastic cards in a metal business card holder.
We look at the video more clearly.
DIY RFID reader from a controller and a coil of copper wire.
Since the price of RFID devices bites, nothing prevents you from making it yourself from a coil of copper wire and a few more parts.
The main task of the controller is to read the data stream. The sampling frequency is known to be 125 kHz. And access cards are used everywhere, by the way they are also used in supermarkets to prevent losses. Tags are installed on clothing and consumer electronics, perhaps just do not fit in sausage, cheese, chips and beer
. In general, in products.
Two students built an RFID reader out of handy tools and described in detail how they did it. Including diagrams, diagrams and more. This is theirs device with theirs student cards.
And here is their website: https://instruct1.cit.cornell.edu/co...site/index.htm
Audio-skim on Diebold
Greetings, this topic shows how to assemble an audio skimmer in 10 minutes, without spending much
This method is known to everyone, but still, let's take a closer look
We need: a Chinese spy pen, a tape recorder head, a phone battery (860mah grab), 2 different colors of wiring, electrical tape and a soldering iron.
Where do we start?
Of course, with the choice of a Chinese spy pen.
Pens come with built-in memory (2-16GB) or with a slot for a micro-sd flash drive, this stuff is easily common and is widely used in Chinese shops. It is better to make several models of pens from different china shops.
And so, we take the handle, unscrew the bottom of the handle where the rod is, we see the input for charging (it can be of 2 types (input for the wire as on the players, Nokia 6300, etc.) or just USB
I came across USB. Remove the pen case, only the board remains in front of us
Here is a photo of this board:
There are only 2 buttons on it: Above-on / off, in the middle-reset
And also 2 lights: yellow-charging / waiting, blue-video recording
It is necessary to replace the battery, otherwise the skim will not work for long, we remove the old one and put a new battery, it will be located at the top of the
muzzle.Before soldering the head, we need to increase the wires that will connect the head to the board, we solder the old ones (they are in the photo: red and black ), we solder the wiring about 4 cm so that there is a small margin and the head was in the transparent as expected.
we solder the head to the wires - all that remains is to install and fill it correctly. The camera is installed at an angle (here you will need to measure at the atm whether it is standing correctly)
The total will turn out (photo taken from the Internet):
These audio guts are suitable only for the opteva dib) now many models of this company are equipped with sensors for skimmers. How to check if there is such a sensor?
And everything is very simple, in the dark, we sculpt a nail on the scotch tape on the card collector and wait) if within 30 minutes it has not gone off and no one has arrived, then this anti-skimming system is not installed on this ATM.
Interference caused by ATM is also possible, shield your devices)
P.S. Before installing the guts, glue the muzzle again from the inside (no matter how sellers assure you of the strength of the muzzles), otherwise a small misunderstanding may happen
1) First, you need to choose a country, because pooping where you live is bad manners, and our policemen are not there. They cunt you hurt, in the kidneys, and even on the head, laughing and cheerfully, they will knock your testimony out of you, and then you will find out on TV who killed Kennedy.
The country should be high-tech, a little fucking and not a third world. I strongly advise you not to go shopping in Bangladesh or Iran. I will not say where I went, so as not to burn Mecca of suckers and naughty naive Nanai boys.
2) There must be at least two escape routes from the country. I usually fly there by plane, and get back by sea. On the plane and the customs are meaner and there are more hi-tech cunning bath devices. Check into a hotel or by scanning a passport made at home on the left data or by any means try not to show your real ID. If you settle on a copy, argue that you are in a foreign country and handed over your passport to your travel agent, because you are afraid to lose it. Stay exclusively in inexpensive motels, it's easier there. Change your motel once a week. And, of course, we don't card the motel. No fanaticism, comrades.
3) We buy dumps. Everyone says that dumps of Europe are better, I will not argue with anyone, but that for me - this statement is not very true. American dumps shoot no worse, here, of course, a lot depends on the country, that is, it may stupidly stand the region lock of the very country where you are going to shop. You can't guess here. For successful and fruitful work, I take VISA / MC CORPORATE / GOLD and MC WORLD, this material has always shot, and will shoot. I advise you to keep statistics on what limits are on the card. In most cases, GOLD / CORPORATE allows you to withdraw 500 raccoons for a tranche abroad, BUT this is not always the case. So try it. MC WORLD and INFINITY dumps are not limited at all. That's why it's called WORLD.
3) Find blanks or make them yourself. If you have a printer and an embosser, then I have nothing more to say. If not, then we find salary-type blanks so that the actual card number is not stamped on the card, but there are 4 digits with the holder's surname. This option is what you need. I had to sweat for a long time, BUT everything will be exactly in the end. If possible, look for blanks that have not yet expired their printed expiration date.
4) We write a visa dump for a visa, for a master, a master. It's a trifle, but I got it wrong once.
5) Choosing a shop. It should be at least a couple of three kilometers from the place where you live, the seller should be, if possible, a woman, it's easier with them.
6) If you are with a partner, leave him on the street and then let him come after a while, pretending that he does not know you, if a non-standard situation arises, he will be able to pay for you, saying, for example, that you live in 1 hotel. Here at your discretion. You don't have to ask him to come in at all.
7) You must ALWAYS have an amount equivalent to the purchase price in your wallet. If it suddenly starts something pale - ALWAYS PAY CASH and pretending to be dissatisfied, eat it quickly.
8) NEVER BE NERVE. I always stand near the village and imagine the sea or a meeting with a pleasant person. It won't work right away, but try to hide your emotions. Smile. Dress expensively, but not provocatively. Buy glasses with 0 lenses. Glasses inspire confidence. Speak little and to the point.
9) Making expensive purchases.
Jewelry requires a special approach. She needs to be fed. We go to the shop, we are interested in jewelry, we measure it, pretend that we really liked the product, we climb into the shovel and say that you do not call attendants, but you are now going on an excursion / funeral / to the village to see your grandfather and upon arrival, if you don’t forget to you will return to them. In short, he does everything to be remembered. At the same time, ask if they accept cards and tell how much your wife will scold you for spending so much money. After 3-4 hours we go there again and calmly leave the happy owner of the gold jewelry. All jewelers love cash a lot, so take a look at the situation. Be sure to bargain and ask for a discount.
10) Expensive things and equipment. There are no problems with things at all. I tried it on and bought it. Choose shops where the sellers are girls with whom you can have a nice chat and win over. The stronger your contact with the seller, the less likely he will not even look at the map. Don't poke your nose into mega-brand boutiques like Prado and Louis Vauton. There, the sellers are trained, because they work with foreigners.
Technology - you have to be careful here, because the people who sell equipment and computers are well-trained and in most cases they whip the trick on how to work with the card correctly. Look at the situation, and buy goods up to 1k raccoons.
11) Universal rules. Before making a purchase, always observe the cashier and see HOW he serves other customers; what he pays attention to when they pay by card. Try to buy something cheap for a start, for 100 bucks, look at the process and fuck it to the fullest. Well, about cash in the case of pale, I have already spoken. Never carry all your blanks with you. Use 1 card per day, because the fewer cards you deflow, the less the likelihood of a palette will occur. One card can live for quite a long time and give its limit per day. The more cards you start using, the more banks will start sounding the alarm. Carry 2 cards and cash with you. One didn’t pass the other, a friend didn’t go through, or he dumped, or if a particular thing is pale and the seller starts to boil, he shoved him the cash and dumped it. Nal solves all problems - proven, BUT this is the most extreme way. If any problems begin, the MOST important thing is to take the card out of the seller's hands, just take it and pull it out, talking to the seller. Never leave stuff. Look for shops that don't have an electronic lock on their doors. Now these are very popular. The doors are locked from the remote control. Oh, never go to the same store twice. Even if the card is not blocked. Minimize your risks. In such countries where I have worked A LOT of cameras, do not forget about the cap and glasses. Not sunscreens of course. Do not wear cap + glasses! Alternate. Change your clothes often. Don't wear the same one every day. In some cases, when buying, they require an ID, carry with you a printed copy of the passport, the left one naturally, arguing that you are afraid of losing and locked it in the safe in the room.
12) Non-standard situations arising at the time of the acquisition of things.
a) We run out of loot on the card, tulip a card to a friend or refuse / pay in cash. Here, according to the situation
b) The limit is exceeded, see point a)
c) The card is stolen (code 06, if I'm not mistaken), we complain to our bank that issued the card and sin that it is used abroad and the bank has blocked it. Pretty wet code, they can get fucked. The main thing is not to worry, TAKE the card from your hands, then according to the situation. If the case smells like kerosene, then eat or tulle another card. The main thing is not to be nervous. I tell myself that this is my real card. It's easier.
d) The numbers on the card and check do not match. Usually they are not looked at at all if the tranche has passed. The seller, believe me, I am not less satisfied than you. He sold a lot of goods and at a high price. But if suddenly this happened, I excuse myself saying that it is possible some kind of banking error and that the card is shooting in another country by issuing a different code, I spread my hands in surprise and promise to call the bank in the morning and find out the reason. That is why I asked to use only salary cards, there is no number there. I have little experience here, but the above version gave a ride with a bang.
13) In the room, unpacking things, tear off all the price tags, throw away all receipts, and throw away the boxes and packages yourself, without leaving the cleaning lady.
14) Try not to card any kind of attractions with Disneylands, that is, places where you will be for more than 1 hour in an enclosed space.
15) In the evening, after a successful shopping, sit somewhere in a bar. Find bars where you pay in cash, it is indecent to burn on a 20 bucks glass of whiskey.
16) Don't poke your nose into the casino. Tales about how in a casino you can get cash out up to $ 500 without documents, or buy chips and play a little bit to exchange fairy tales for loot. I do not advise. There is 1 sq. meter in three, or even 4 cameras. Far from being fools work there. So do not be impudent.
17) We leave the country by another type of transport, where you leave the ship or leave by bus - do not card ANYTHING, spend exclusively yours! Customs when you leave the country are kind and welcoming. Bring at least 35 kg of cannabis. It doesn't give a fuck about them anymore. Let them out, but agree with ours. You can import 35 kg + 2 liters of alcohol and a couple of blocks of cigarettes into the RU. The overweight is 4 euros per kilogram. We practically do not weigh anything if the bag is not visually huge. So take it and don't worry. I was carrying a kilogram of 60, not fucked up. Although even if they do it, I think everyone will find it to pay 4 euros per kg.
Happy shopping.
In posah, as in Auchan, there is a bypass three times, insert the back side not with a chip but with plastic, after the third error, the picture on the display changes to hold a magnetic tape, and despite the fact that the card with the chip, the purchase will pass. I think he knows the methods of anonymity, a mask, glasses, disposable clothes from the garbage, no phones. You can fill in the dumps on any old, both bonus and bank cards where there is a magnetic stripe, even from a sportsmaster, that is, they go as balvans. Balvanks are also sold on Ali with encoders, just enter the model and do not forget about cashback, coupons and refund
Verifon terminals. Workers connected to existing EU firms. After 3 chip errors, the card with the chip is sent to the strip + pin code. And voila, the transaction is confirmed and the fiscal receipt. It is clear that the bins are only EU, but it turns out that 201 will also fill up and how to
shove the card 201 with the other side of another emitter into the terminal of another emitter 3 times, waited for the inscription "stretch to ..." held out + pin and the transaction goes through. The holder test was for a bin of the same country as the village. But at the same time, the holder is traveling but very rarely calculated with a test card in the testing region. It is clear that the lok region disappears here, but this is how the mechanism works.
NFC write is the same method of transferring data from a chip. Well, yes, you can copy the transmission signal and then play it back, but this trick works only at certain payment points that support MSD. You can also extract the card number and the date of validity from this signal. You can also broadcast this signal and carry out the so-called release attack. Well, it seems like Samsung tokens can be copied!
how to do it in Belgium
There is a city of Antwerpan, a city of diamonds, drugs and prostitutes and a lot of emigrants. Everything can be found in this cursed city. And so, for a start, we need an encoder dump and plastic (we buy it on the internet), but initially we
buy an ID card
We buy it from drug addicts near the central railway station in Antwerp,
a person about your age, not a native Belgian atom, burn because you don't know the language well (you need to know a little language, at least English) order plastic in this name and after giving the narik's data order the same ID card but with your photo, she also rides on white blank with a chip, we need this so that the royal security number matches, now you are not Vasya Pupkin but some kind of Stefan van de Bosch))) or even better, a Turk born in belgium Yes, you still need to ask the narik for the full address of his registration, why? I'll tell you later)))
Then we take the dumps and roll them on plastic, in my experience, Japan, Brazil, Israel, Argentina, yusa will fill up well, but quickly die
. Stefan van de Bosch (software available)
Important: clothes should be branded, but not too conspicuous, you must behave calmly and always smile, be polite, merge with the crowd.
Now we rent a shopping car for a week, preferably in a small company not in Avis and Citikar! It is undesirable to shop in big cities !!! It is better to go to the villages, It is not advisable to shop in large shops where there is a guard !!! And in small boutiques where there are 1-2 saleswomen, so that if something goes wrong, they will apologize and leave. Going to the store, nodding politely to the saleswoman, assess the situation, the presence of cameras, security, how many people are inside, look at the goods in parallel (the easiest way is to buy clothes, cigarettes , alcohol, it is possible and electronics iPhones Notebooks, but this is more difficult, at first it is better to abstain) in a few minutes this sponge will come up to you and offer its help, you should already decide on the purchase, but I would like to buy a Notebook, but I do not know what will suit me , she will ask you for home or work, in short, lead her by the nose, pretend to be a fool, do not choose the expensive, she herself will try to sell you the most expensive, sigh when she announces the price, reluctantly agree, ask about the guarantee, tell me you would like to buy it, but do not remember the balance of the card (insurance if the card does not give you) go to the poster terminal, take out the partmone, you strike the card with a card and immediately back to the partmon, there should be 2-4 cards similar, if not, say why for bullshit, try again and quietly take another card (several attempts) pay off, sign on the check , gladly that I had enough money, you shouldn't be nervous !!! thank and leave. you strike the card with a card and immediately back to the partmon, there should be 2-4 cards similar, if not, say why for bullshit, try again and quietly take another card (several attempts) pay off, sign on the check , gladly that I had enough money, you shouldn't be nervous !!! thank and leave. you strike the card with a card and immediately back to the partmon, there should be 2-4 cards similar, if not, say why for bullshit, try again and quietly take another card (several attempts) pay off, sign on the check , gladly that I had enough money, you shouldn't be nervous !!! thank and leave.
The card did not give possible options or gave out a pickup, etc. You are outraged, they say, the card is okay, this is your left, if she starts calling the number pasted on the pose, 98% will not get through, it is better to leave in this case ask for a card, they say you will withdraw cash at the bank around the corner and come and pay, if you don’t give it back, just calmly leave, and blame the city right away !!!!
It is better to have a buyer for the staff in advance. The easiest way is to buy cigarettes and alcohol, packs and Indians immediately buy up in order to resell in their store the price of Marlboro 5 euros per pack Pak will give you 4. Buying 10 blocks for 500 you get 400 clean exhaust. Varian with an iPhone you buy for 700, sell for 60% and you have to look for a buyer, and it is more difficult to buy at times, an option with clothes, size, color, brand and sale for 30-40% This is me I say if you sell in belgium!
In short, see for yourself according to the situation and connections, you can sell clothes and electronics to Jews in jewelry stores near the same damn station.
Now sweets: food, gasoline, clothes for yourself, all for dumps.
Hikes to the streets of red light districts too, that is, you go to a prostitute, she will serve you, you tick on the poo and sign on the check, you leave)))))
train trips, I even paid for a dead card, you calmly sit on the train and wait for the conductor, seeing him from afar, you rush to him, Monsieur help, I was late did not have time to buy a ticket at the box office, what should I do aaaaa, he says they say everything is ok, you can buy it from me, but a little more expensive.
This DEER has an apparatus in his hands, he strikes a card on it and displays a ticket in the form of a check and gives you the card, but the trick is that his chumadan is not connected with the Internet, he just reads the dump and that's it, they try to withdraw money after arriving at the
To station there is a carriage restaurant at your disposal whiskey, champagne and a trip to Paris in first class
And the last thing: why we needed the address of a drug addict, you can go to all banks, open a bank bank on your Id card and then accept bays, they send a card to the address, and take a pin in the bank, or vice versa, but you can always come up with a story that they say you don't live at the old address, looking for an apartment, but right now, you live with friends, is it possible to pick up the card and pin here in the bank (I was rolling it on the docks because you are a citizen of the kingdom) I
almost forgot from the same Jews you can cash out for% you strike for 8k it I counted you on the spot and you left. There are a lot of such shops, as a rule, Turks, Arabs, and people from the CIS.
In general, I wrote the article for the first time purely for acquaintance, everything that was written from my life experience !!! The topic works in BU, FR, NL, Luxembourg in Germany, everything is more complicated already under tired, in general, in recent years, Lithuanians, Ukrainians and Romanians have pulled up tightly in this topic. Armenians all shops with perfume are tired. In any case, each city has its own nuances.
Scheme of assembling radio chips from Eva
So, we decided to create a skimmer that transmits sound and pins over the radio channel.
The scheme of work for us will be as follows:
The sound is removed from the magnetic head and transmitted over the FM range to any receiver (for example, an mp3 player that can write a radio or a car receiver for many hours in a row). The signal from the pin-pad will be transmitted in the same way, only instead of the head there will be a tone dialing generator.
As a result, we will get two records - the first will have sound with dumps that can be sent for decode to some service (cunning Eva XD), and the second will have beeps (do-re-mi-fa-sol-la-si) , where a specific number will correspond to each note. And any musician will guess the pin code from four notes)))) Well, or in the sound editor, open it and see what kind of number is under this or that tone. More on this below.
We will need:
Two radio transmitters (done in the first step).
Tone generator (done on the second).
Two radios with signal recording function (buy a player for 1000r and don't worry).
First. We make transmitters.
For the transmission you will need:
The coil is made independently. We take a PEV0.5 wire (just a copper wire 0.5 mm in cross-sectional diameter), wind it on a cylindrical object with a diameter of 5 mm. 5 turns. Then we take out the item, and fill the coil with hot melt glue.
Antenna - remnants of a wire of 5-10 centimeters of arbitrary shape.
Battery tablet (1.5 v) Power
button (big red XD)
Transistor KT3102 (in radio components they know what it is, it costs a penny)
Resistors for 3.3k, 10k, 1k (also pennies are in the same place)
Conders for 12n, 100n, 5p, 10p, 28p (I think there is no need to explain where to get it and how much it costs)
The wiring diagram itself (either print the finished one (link), or solder on the workpiece, scratching the tracks with a clerical knife, it costs 100r maximum)
Head for reading sound from an audio track.
Now we solder all this to the circuit.
The microphone in the diagram indicates the magnetic head itself (in another article, read how to strengthen it on the knees, but we hardly need it).
When assembling the second transmitter, the tone generator will act as the microphone.
So the guts for the dump transmitter are ready! In the third paragraph, we will configure them, but you can already mount them in the face!
Second. Putting together a tone dial generator.
We will need (all in the same radio parts, we don’t buy pies in the school cafeteria for a couple of days and save up for details):
10 buttons
1.5 V tablet battery (although it’s easier to use the same battery as the transmitter uses)
10 resistors for 20, 40, 60, 80, 100, 120, 140, 160, 180 and 200 k
Transistors KT315 and KT361
Conder for 50n
The wiring diagram will have to be done already on the pin-pad, because the buttons are scattered over the face.
so we solder! We put an opening key and one of 10 resistors under each pin-pad button.
The red triangle marks the radio transmitter. By the way, you can power on from the transmitter (boldly connect to the same battery in parallel), all the same, our pin-pad will work from one battery in the summer for two months))) But if the transmitter is crooked, then it will slightly change the transmission frequency for each button, so that on the diagram I added a separate battery for the tone generator.
Guts in the pin-pad now lie too, let's go yeah!
Step three. Customization.
If your hands are straight, then just turn on the transmitter and on the autosearch of frequencies you will catch your transmitter immediately. It didn't work out - we heat it up a little with a lighter with hot melt glue and change the distance between the turns of the coil. And if your hands are also golden and it turns out to tune both transmitters to the same frequency, then you only need one receiver and you don't have to synchronize in time from two audio tracks and we will get a pin just between the input and output of the card.
Be sure to listen and memorize the notes that correspond to each pin-pad digit. Well, or write it down in the editor, if the department "k" came to the ear in childhood)))
That's all! You are great!
You can now safely put the skimak for field tests in the conditions of the far north or harsh Africa, in order to have guarantees that the frequency will not go astray on the transmitter due to the thermal deformation of the copper coil! The maximum operating time for the skimmer has not yet been established. There is a possibility that he feeds on the holy spirit of Eve)))
Pros:
working time - up to two weeks guaranteed, but months (years?) - check it yourself.
security - in case of removing the skim dump from you.
small dimensions - you can wriggle everything into an inner rail to pack)
cheap manufacturing - the guts will pay off on average in 0.01 seconds of device operation))).
Minuses:
when changing the temperature regime, the slightest deformation of the coil knocks down the frequency. You have to periodically adjust the receiver. For example in the morning and evening. Or just make thermal insulation, but all the same, from room temperature to street temperature will slowly fall or rise)) the
radio transmission distance is up to 150 meters, but a high-quality signal in line-of-sight conditions is 30-50 meters, indirect - from 5 to 15 meters. You can sniff the receiver with a dictaphone behind the cornice next to it or stick it somewhere. Be smart, not all I think for you!
The radio transmission frequency will also drop as the battery is discharged, but in the field at a temperature of 20 degrees (and we all remember that in the cold, the battery capacity drops significantly) within two weeks the voltage from the battery did not drop so much that the transmission frequency would drop.
Many (especially beginners) are tormented by the question: "What guts should I put on my skimmer / device?" A lot depends on the answer to this question:
- Percentage of the count;
- Working hours;
- The quality and speed of the decode;
- Bypassing protection systems;
- Your progress on the "Real career ladder".
The intestines are the internal electronic part of the skimming device, which is responsible for processing and recording information contained on the magnetic stripe of a plastic card.
Audio.
Let's start with the classic audio guts. The principle of any audio guts is to record sound from magnetic tape on a credit card. Basically, the audio guts are a regular voice recorder that records the audio data coming from the audio head, which is located in the place of the microphone. Further, the audio data must be processed (decoded). The quality of audio data depends directly on the sampling rate. The process of decoding audio data depends on many factors and, in some situations, can be difficult. The time required to decode one audio track is from 5 to 30 minutes.
For the most part, the cost of these guts is low, about 10-50 dollars. The size ranges from 10x20 to 60x60mm. Nutritional intake is quite high compared to flare intestines. Usually there is enough memory for continuous recording. Many people choose audio because of its ability to decode in non-standard conditions (noise emitted by ATM; jitter; crooked holder). Most of the audio is not encrypted. As a rule, audio chips only read the second track.
Miniature dictaphones such as "Edic-Mini" can be used as guts.
Next, consider the radio guts.
The principle of operation of radio guts is based on a transmitter module that is inserted into the face and a receiver located near the ATM (usually a distance of 10 to 200 meters), i.e. consists of a "radio beetle" and a radio station with a dictaphone (a tablet or PDA is often used as a dictaphone). Frequency matching problems may occur depending on the type of transmitter. The receiver is often combined with a dictaphone, which records the received audio data. The big disadvantage of this type of intestine is radio interference, which can significantly complicate the reading.
The time required to decode one audio track is from 5 to 45 minutes. The cost of these guts will start at $ 100. Size from 5x10m to 10x30mm. Another unpleasant aspect of this type of gut is the extremely high consumption of food. They do not require strict conditions in the amount of transmitted data, because on the side of the receiver, you can put a voice recorder (or other recording device) with any amount of memory. You can buy it on "spy sites", radio amateur sites, carzh sites, radio markets.
Bluetooth guts are similar in action to radio guts.
They also have a receiving module that stores the received audio data. The intestines are made up of a bluetooth headset and a mobile phone (or tablet). A pleasant feature of these guts is the transmission of data in digital format, therefore they are not afraid of any interference. An unpleasant feature of these guts is a DSP processor that can filter data in real time (it is used by mobile device manufacturers to filter out various high-frequency noises and squeaks, such as wind).
The time required to decode one audio track is from 5 to 30 minutes. Old guts (Samsung WEP-410) lack DSP. The cost of these guts is from $ 100. The size of the transmitting module is from 10x20mm to 20x30mm. Power consumption is the same as that of radio guts. They do not require strict conditions in the amount of transmitted data. Reads noise and jitter just like classic gut audio. They do not have encryption.
Next comes GSM audio.
The principle of operation is based on two cellular telephones, one of which transmits audio data, and the second, in turn, records a telephone conversation in its memory. Some people use Chinese-made GSM bugs like N9 (GOOGLE: GSM bug N9). Guts, just like bluetooth, use a DSP processor.
The cost of these guts starts from $ 150. The time required to decode one audio track is from 5 to 45 minutes. Power consumption is large enough, close to bluetooth guts. Large sizes, in comparison with analogues from other categories of gut 50x50mm approx. Large food consumption. They do not require strict conditions in the amount of transmitted data. You can buy it on sites selling spy devices, Chinese sites, radio markets.
The last audio chips that I would like to discuss are "Spy devices", like pens with a built-in camera, key fobs, etc. The latest spy devices produced are of a sufficiently pleasant quality to work in skimmers, such as 2in1 (sound and audio are written in one muzzle), but the quality of performance itself suffers greatly. You can often find freezes, limited operating time (despite the large amount of memory up to 32GB), breakdowns. The time required to decode one audio track is from 5 to 30 minutes. Cost from $ 20.
Flash.
Although the principle of operation of guts is to receive audio data from a magnetic track, the end result of flash guts will already be, not audio data, but data in text format, the decoding of which has either already been performed, or it will take a little time to decode the entire dump. In addition, no special knowledge of the F2F decode is required.
The principle of flash guts is partial decoding of audio, namely, in determining the timings "on the fly". Typically, this is done with magtek hardware decoders (21006501-21006541). Operational amplifiers are less commonly used to determine timings.
The time required to decode one track is from 2 to 119 seconds. The cost of flash guts is an order of magnitude higher than audio. The cost starts at $ 200. Size from 5x7mm. An important factor in these intestines is the low nutritional intake of 0.2 mA. In "combat mode" they can work for 6-9 hours with a 6-9 mAh battery. There is enough memory for 500 or more dumps. Flash ones categorically do not tolerate Shumka, but they read jitter well enough. As a rule, all flash guts have built-in encryption, which is quite enough for renting a device, but absolutely not enough to protect against experts in the field of data decryption. basically it uses XOR-encryption, sometimes combined with "plus-minus byte" (ie, for example, we have the original text 123456, after this method the text will be 214365).
A radio flash differs from a conventional flash in that data is transmitted to a receiving module located near the ATM. Instead of memory, a transceiver microcircuit (or a similar module) is used, such as nrf24l01, which has its own digital data transfer protocol, which is not afraid of external interference. The cost of such guts will be from $ 300. size from 5x7mm. Power consumption is not significantly higher. than a regular flush (0.5 - 0.9 ma). The amount of memory is usually extremely large due to the fact that an external data reception module is used. All other parameters do not differ from the classic flush.
The essence of GSM-flash guts is to send dumps in the form of SMS messages. The transmitting GSM module itself is large, so it is located near the ATM, and data is transmitted to it via a radio channel. Those. GSM gut consists of a radio flash and a GSM module (which often includes mobile phones or tablets that process the received data and send them by SMS). The cost of such guts starts at $ 500 with a size of 5x7mm and a consumption like a radio flash.
Outroduction
RFID reader based on arduino up to 2 meters distance.
Electronic access keys and plastic cards have become part of our life. As it turned out, it is quite simple to read information from them. It is enough to use a small assembled device based on a microcontroller, an RFID tag reader and putting all this in a bag from under a laptop, calmly read information not only from electronic keys, but also information from plastic cards - those that are not with a chip, but with an electronic strip.
This device uses an Arduino Nano microcontroller, its power supply is 3.3 Volts. Any price can be used as an RFID reader, depending on the distance at which it can read. To read from a distance of two meters, its price will be about $ 400, if the distance is 20 centimeters, then the price is about $ 150.
In general, all parts can be bought online with home delivery. I will not indicate exactly where, but I am trying to say that it is quite unsafe to carry a plastic card with you even in an ordinary wallet or pocket. About electronic access keys, we can say that it is even easier to skip them, usually they are lying around anywhere on tables or near a computer.
The figure shows that the read information is saved on a usually card in the cards.txt file.
For this and a couple of other reasons, I carry plastic cards in a metal business card holder.
We look at the video more clearly.
DIY RFID reader from a controller and a coil of copper wire.
Since the price of RFID devices bites, nothing prevents you from making it yourself from a coil of copper wire and a few more parts.
The main task of the controller is to read the data stream. The sampling frequency is known to be 125 kHz. And access cards are used everywhere, by the way they are also used in supermarkets to prevent losses. Tags are installed on clothing and consumer electronics, perhaps just do not fit in sausage, cheese, chips and beer
Two students built an RFID reader out of handy tools and described in detail how they did it. Including diagrams, diagrams and more. This is theirs device with theirs student cards.
And here is their website: https://instruct1.cit.cornell.edu/co...site/index.htm
Audio-skim on Diebold
Greetings, this topic shows how to assemble an audio skimmer in 10 minutes, without spending much
This method is known to everyone, but still, let's take a closer look
We need: a Chinese spy pen, a tape recorder head, a phone battery (860mah grab), 2 different colors of wiring, electrical tape and a soldering iron.
Where do we start?
Of course, with the choice of a Chinese spy pen.
Pens come with built-in memory (2-16GB) or with a slot for a micro-sd flash drive, this stuff is easily common and is widely used in Chinese shops. It is better to make several models of pens from different china shops.
And so, we take the handle, unscrew the bottom of the handle where the rod is, we see the input for charging (it can be of 2 types (input for the wire as on the players, Nokia 6300, etc.) or just USB
I came across USB. Remove the pen case, only the board remains in front of us
Here is a photo of this board:
There are only 2 buttons on it: Above-on / off, in the middle-reset
And also 2 lights: yellow-charging / waiting, blue-video recording
It is necessary to replace the battery, otherwise the skim will not work for long, we remove the old one and put a new battery, it will be located at the top of the
muzzle.Before soldering the head, we need to increase the wires that will connect the head to the board, we solder the old ones (they are in the photo: red and black ), we solder the wiring about 4 cm so that there is a small margin and the head was in the transparent as expected.
we solder the head to the wires - all that remains is to install and fill it correctly. The camera is installed at an angle (here you will need to measure at the atm whether it is standing correctly)
The total will turn out (photo taken from the Internet):
These audio guts are suitable only for the opteva dib) now many models of this company are equipped with sensors for skimmers. How to check if there is such a sensor?
And everything is very simple, in the dark, we sculpt a nail on the scotch tape on the card collector and wait) if within 30 minutes it has not gone off and no one has arrived, then this anti-skimming system is not installed on this ATM.
Interference caused by ATM is also possible, shield your devices)
P.S. Before installing the guts, glue the muzzle again from the inside (no matter how sellers assure you of the strength of the muzzles), otherwise a small misunderstanding may happen
