Need help, problem with cloned cards and cashing them out

[Skiboy]

Hello guy, i really hope someone will help me resolve my probleme. And mb for my bad english. So first i got all software and hardware. Ive tried to copy my card to see if i know how to clone and it worked!!
The only thing is that once im at the atm everything work fine i can see the balance and everything but when i click on cashout it decline. Im in canada btw.

 

[Lsjsj]

Hello guy, i really hope someone will help me resolve my probleme. And mb for my bad english. So first i got all software and hardware. Ive tried to copy my card to see if i know how to clone and it worked!!
The only thing is that once im at the atm everything work fine i can see the balance and everything but when i click on cashout it decline. Im in canada btw.

Kindly contact me via telegram asap

 

[Carding Forum]

Hello.
Please answer the following questions:
1. What EMV software do you use to record cloned cards?
2. What device do you use to record blank cards?
3. How do you write to the EMV chip or do you only write data to the magnetic stripe?
4. Where do you get the IST files for recording the EMV chip?
5. Did any errors occur when writing a blank card? If yes, which ones?
6. Where do you get the dump with the pin?
7. How do you check the validity of the dump?
8. Did you generate track 1 from track 2 or was the map dump complete?

I think your problem is that you recorded a dump+pin with a regional lock. Such a dump can only be cashed within the country in which the card owner lives and in which the issuing bank is located.
The problem may also arise because the EMV chip is not recorded correctly or is not recorded at all.

 

[Skiboy]

Hello.
Please answer the following questions:
1. What EMV software do you use to record cloned cards?
2. What device do you use to record blank cards?
3. How do you write to the EMV chip or do you only write data to the magnetic stripe?
4. Where do you get the IST files for recording the EMV chip?
5. Did any errors occur when writing a blank card? If yes, which ones?
6. Where do you get the dump with the pin?
7. How do you check the validity of the dump?
8. Did you generate track 1 from track 2 or was the map dump complete?

I think your problem is that you recorded a dump+pin with a regional lock. Such a dump can only be cashed within the country in which the card owner lives and in which the issuing bank is located.
The problem may also arise because the EMV chip is not recorded correctly or is not recorded at all.

1. For the software see the picture.
2. I use omnikey and msrx
3. I write the emv chip and the magstripe with the software and device
4. For the ist files i create it with my card because ive only tried with my card.
5. No error.
6. I got the dump+ pin from my own card but in the futur i will buy from Bigfat.
7. I dont know how to do it
8. Yes i generate from track 2.


Other information that i can give you :
The dumps code was a 220
Im in canada
Bin was 450644
Everything work fine at the atm but not the cashout.


Thank you!!

 

[Skiboy]

1. For the software see the picture.
2. I use omnikey and msrx
3. I write the emv chip and the magstripe with the software and device
4. For the ist files i create it with my card because ive only tried with my card.
5. No error.
6. I got the dump+ pin from my own card but in the futur i will buy from Bigfat.
7. I dont know how to do it
8. Yes i generate from track 2.


Other information that i can give you :
The dumps code was a 220
Im in canada
Bin was 450644
Everything work fine at the atm but not the cashout.


Thank you!!

That the software

 

[Carding Forum]

Why are you creating IST files from your card?
The IST file must match the dump you are recording.

Also, you did not check the validity of the dump before writing it to the card. It is quite possible that you recorded a dead dump and the card will not work.
You can check the dump using online checkers.

BIN: 450644 - issued by CANADIAN IMPERIAL BANK OF COMMERCE
This means your problem is not regional blocking, but not the correct recording of the EMV chip, since a unique IST file is required.

Add here or create a separate topic for which step-by-step guide you cloned the card.

Where or from whom did you buy all the EMV software and at what price?

 

[Skiboy]

What online checker do you propose me??

And ist files is really hard to understand !!

SEEE THE STEP BY STEP IN PICTURE


ive buy all my software from atrstudio.org

 

[Skiboy]

And j2A040 java card that i suspect that is not working because card in canada dosnt have big chip its smaller