Hacker
Professional
- Messages
- 1,041
- Reaction score
- 851
- Points
- 113
I'll tell you a little about the antique itself and its possibilities for general understanding.
Mobile antidetect is a system firmware of a phone on an android with various software, this system firmware is called root. (Root; superuser; root; superuser rights).
Root gives you the right to carry out ALL operations on your android device, including making changes in the / system folder.
Mobile antidetect is capable of:
1. The ability to replace all hardware identifiers of the phone. Change screen resolution and phone sound card print. Substitution of gps and imitation of movement.
2. Create a unique and not unique fingerprint of the system, browser.
3. Create dozens of clones of applications on one device with their own unique system fingerprint.
4. Connection to any kind of proxy, tunnels, openvpn without any leaks.
5. You can also emulate the camera.
6. And the most important thing is that you can connect your videos to NFC and at the same time you do not need to constantly change phones, it is enough to change the hardware after working out the ss and start the next working off.
! Now I'll tell you what phones and android versions you can use. In fact, phones will fit almost all, to be sure 100%, google about your phone and root on w3bsit3-dns.com. But it is important that your phone is on Android 9. (If it is lower, then we update it, if it is higher, then roll it back. Look for instructions on how to rollback on the Internet) I recommend taking simpler phones for the first time, since if you do something that is not clear according to the instructions or the firmware will fail your the phone can turn into a brick, or in the best case, go into a bootloop (bootloop - constant reboot of the system). There is a way out of the bootlap state, but the brick will remain a brick.
Preparing the phone.
Before starting to make changes in the firmware, you should roll back the phone to the factory settings and activate it again, indicating the English language of the system, time, etc.
The first step in installing antidetect, we need to install a custom TWRP recovery on the smartphone, it will give us:
• Install unofficial firmware
• Install add-ons and patches
• Create a backup of both the entire firmware and its individual parts
• Restore data from a previously created backup
• Connect to PC via USB in removable storage mode
• Connect to PC via USB in ADB mode
• Reset data to factory settings (Clear data), clear cache partition (Clear cache), clear dalwick cache
• Format and create partitions.
TWRP installation instructions:
First we need to unlock the bootloader on the phone, for each brand of phones this is done differently, so we take our phone and google "unlock bootloader Samsung s6". On some phones, it will take 7-10 days to unlock it, on some brands this can be avoided by stupidly changing the time 7-10 days in advance, I recommend adding + 4-5 hours to this.
Unlocked the bootloader? Go ahead!
2. Now we need to go to settings-> find developer settings-> enable USB Debugging.
3. Download the tool for installing the recovery. recovery_installer.zip (http://files.mi-room.ru/files/pc/adb/recovery_installer.zip)
4. Download the recovery for your device in the appropriate section of TWRP Recovery (https://portal.mi-room.ru/files/twrp-recovery/) and move it to the folder with the unpacking tool (for some recoveries, the installer is immediately available directly in archive). The file name should be "recovery.img". As a result, the contents of the folder should be as follows:
5. Turn off the phone
6. Simultaneously hold down the volume down key and the power key, hold for a few seconds until the phone is in Fastboot mode (on most devices, a rabbit in a hat with earflaps should be depicted)
7. Connect the phone to the computer
8. In the folder with the tool for installing the recovery, run the "Install.bat" file by double clicking the mouse button. (if you downloaded the "complete installation kit", you need to run the "TWRP_Install_select.bat" file, press the number "1" and the "Enter" key)
10. Recovery should be installed automatically. After that, enter TWRP Recovery manually: hold down the volume up and power keys, and after the logo appears on the screen, release the power key and continue to hold the volume.
After all this, the bootloader window should open, if it opened, then everything went well. Turn off your phone and turn it on as usual.
Installing Root.
We now proceed to install the system firmware. We will use Magisk software, as it is the easiest to install and meets all our requirements.
To do this, we need to go to w3bsit3-dns.com and download version 20.4 20400 and manager 7.5.1 (267). (https://w3bsit3-dns.com/forum/index.php?showtopic=774072&st=29140#entry95118832 (https://w3bsit3-dns.com/forum/index.php?showtopic=774072&st=29140#entry95118832) We need two files , these are Magisk ZIP and Magisk Manager.It
is desirable to have an SD card for convenience and put the downloaded files on it.
Getting started with the installation:
For more detailed installation instructions, I recommend following the link and performing all the steps for the operator, since in this video everything is done very simply and clearly.
Made? Moving on!
Now we need to install one more important system program called EdXposed Framework.
To do this, we go to (https://github.com/ElderDrivers/EdXposedManager/releases (https://github.com/ElderDrivers/EdXposedManager/releases)) and download version 4.5.7 (45700). Look carefully at which version you are downloading!
Next, download the file files attached in the zip: Riru Core and Riru EdXposed.
Let's move on to the installation.
1. Go to Magisk-> Modules-> click on the plus sign and we are thrown into the file manager-> install riru core and reboot the phone-> then go there and install the second riru edxposed file and reboot the phone-> then install our EdXposed Manager 4.5 .7.
Made? Congratulations! Now all the most difficult is over, it remains to download the necessary software and configure the whole thing.
SOFT
Now I will give you a list of all the software that we will use and a brief description for each.
Device ID Masker (green logo with a white mask) - changes the data on your phone's hardware (imei) and other parameters, this is the xposed framework module. We download it through EdXposed Manager-> download-> device id masker lite, and immediately pay for Pro.
Device Emulator pro- the same as above, but there are a couple of points that are not in the masker.
(https://4pda.ru/forum/index.php?showtopic=603033&st=560 version 3.43. The menu should contain items Advertising ID and GSF)
Socks-Droid (purple background and white key) - change ip and dns. (Downloading from Google)
ccleaner I think he knows everything, it is convenient to clean garbage on the phone (download from gplay)
Device info - shows system hardware identifiers (download from gplay)
Total commander - system file explorer. (Downloading from Google)
RAR - zip manager (download from Google)
RootCloak - hides the root (download from EdXposed)
Download any VPN you love from Google.
Download Firefox from Google. We put the add-ons Cookie Quick Manager (we load cookies through it) and WebRTC Protect, CanvasBlocker (red fingerprint) we put maximum protection in it, AudioContext Fingerptint (gray fingerprint). The browser is ready.
Download APKPure. Search through a search engine. (similar to google play).
App cloner - create clones of applications. (https://w3bsit3-dns.com/forum/index.php?showtopic=728647)
System setup
Let's start with Magisk.
Settings-> Magisk Hide
(Here we shackle root from applications. Installed any app without opening it, first go to magisk hyde and put a checkmark on it, then add cloak to root and add app via add app.)
-> now we first look for Google Play service and put a tick.
Settings-> Restore Magisk manager-> change to any name .-> scroll down and tick magisk hide. We reboot.
This is where the magisk is tuned.
EdXposed
At the entrance, a blue sign should be lit. The framework is active.
Go to EdXposed-> settings-> application list mode turn on the slider-> go back-> go black / white list-> turn on the slider only on Google Play services / blacklist / and that's it.
Go to the Dowanload tab and download the Disable IPv6 module.
Then we go to the modules and put the checkboxes on over all our downloaded applications.
Exposed Mood. We reboot.
We go to the magisk, below the check safety net, click, if everything is green, then I congratulate you your phone is set up and ready to go.
Preparation for work:
1. Go to Device is masker-> random all-> apply all.
2. Device emulator-> check the Android id and google service framework-> change the values.
3. Reboot
4. Connect to wifi / sim
5. In Socks-Droid, enter the sock and dns-> connect The
phone is ready to work. After working out the map / log, we pay the account in the Google settings, clean the date and cache in Google applications, clean the ccleaner phone, change the hardware and work on.
THE ARTICLE MAY HAVE SMALL INACCURACIES.
Mobile antidetect is a system firmware of a phone on an android with various software, this system firmware is called root. (Root; superuser; root; superuser rights).
Root gives you the right to carry out ALL operations on your android device, including making changes in the / system folder.
Mobile antidetect is capable of:
1. The ability to replace all hardware identifiers of the phone. Change screen resolution and phone sound card print. Substitution of gps and imitation of movement.
2. Create a unique and not unique fingerprint of the system, browser.
3. Create dozens of clones of applications on one device with their own unique system fingerprint.
4. Connection to any kind of proxy, tunnels, openvpn without any leaks.
5. You can also emulate the camera.
6. And the most important thing is that you can connect your videos to NFC and at the same time you do not need to constantly change phones, it is enough to change the hardware after working out the ss and start the next working off.
! Now I'll tell you what phones and android versions you can use. In fact, phones will fit almost all, to be sure 100%, google about your phone and root on w3bsit3-dns.com. But it is important that your phone is on Android 9. (If it is lower, then we update it, if it is higher, then roll it back. Look for instructions on how to rollback on the Internet) I recommend taking simpler phones for the first time, since if you do something that is not clear according to the instructions or the firmware will fail your the phone can turn into a brick, or in the best case, go into a bootloop (bootloop - constant reboot of the system). There is a way out of the bootlap state, but the brick will remain a brick.
Preparing the phone.
Before starting to make changes in the firmware, you should roll back the phone to the factory settings and activate it again, indicating the English language of the system, time, etc.
The first step in installing antidetect, we need to install a custom TWRP recovery on the smartphone, it will give us:
• Install unofficial firmware
• Install add-ons and patches
• Create a backup of both the entire firmware and its individual parts
• Restore data from a previously created backup
• Connect to PC via USB in removable storage mode
• Connect to PC via USB in ADB mode
• Reset data to factory settings (Clear data), clear cache partition (Clear cache), clear dalwick cache
• Format and create partitions.
TWRP installation instructions:
First we need to unlock the bootloader on the phone, for each brand of phones this is done differently, so we take our phone and google "unlock bootloader Samsung s6". On some phones, it will take 7-10 days to unlock it, on some brands this can be avoided by stupidly changing the time 7-10 days in advance, I recommend adding + 4-5 hours to this.
Unlocked the bootloader? Go ahead!
2. Now we need to go to settings-> find developer settings-> enable USB Debugging.
3. Download the tool for installing the recovery. recovery_installer.zip (http://files.mi-room.ru/files/pc/adb/recovery_installer.zip)
4. Download the recovery for your device in the appropriate section of TWRP Recovery (https://portal.mi-room.ru/files/twrp-recovery/) and move it to the folder with the unpacking tool (for some recoveries, the installer is immediately available directly in archive). The file name should be "recovery.img". As a result, the contents of the folder should be as follows:
5. Turn off the phone
6. Simultaneously hold down the volume down key and the power key, hold for a few seconds until the phone is in Fastboot mode (on most devices, a rabbit in a hat with earflaps should be depicted)
7. Connect the phone to the computer
8. In the folder with the tool for installing the recovery, run the "Install.bat" file by double clicking the mouse button. (if you downloaded the "complete installation kit", you need to run the "TWRP_Install_select.bat" file, press the number "1" and the "Enter" key)
10. Recovery should be installed automatically. After that, enter TWRP Recovery manually: hold down the volume up and power keys, and after the logo appears on the screen, release the power key and continue to hold the volume.
After all this, the bootloader window should open, if it opened, then everything went well. Turn off your phone and turn it on as usual.
Installing Root.
We now proceed to install the system firmware. We will use Magisk software, as it is the easiest to install and meets all our requirements.
To do this, we need to go to w3bsit3-dns.com and download version 20.4 20400 and manager 7.5.1 (267). (https://w3bsit3-dns.com/forum/index.php?showtopic=774072&st=29140#entry95118832 (https://w3bsit3-dns.com/forum/index.php?showtopic=774072&st=29140#entry95118832) We need two files , these are Magisk ZIP and Magisk Manager.It
is desirable to have an SD card for convenience and put the downloaded files on it.
Getting started with the installation:
For more detailed installation instructions, I recommend following the link and performing all the steps for the operator, since in this video everything is done very simply and clearly.
Made? Moving on!
Now we need to install one more important system program called EdXposed Framework.
To do this, we go to (https://github.com/ElderDrivers/EdXposedManager/releases (https://github.com/ElderDrivers/EdXposedManager/releases)) and download version 4.5.7 (45700). Look carefully at which version you are downloading!
Next, download the file files attached in the zip: Riru Core and Riru EdXposed.
Let's move on to the installation.
1. Go to Magisk-> Modules-> click on the plus sign and we are thrown into the file manager-> install riru core and reboot the phone-> then go there and install the second riru edxposed file and reboot the phone-> then install our EdXposed Manager 4.5 .7.
Made? Congratulations! Now all the most difficult is over, it remains to download the necessary software and configure the whole thing.
SOFT
Now I will give you a list of all the software that we will use and a brief description for each.
Device ID Masker (green logo with a white mask) - changes the data on your phone's hardware (imei) and other parameters, this is the xposed framework module. We download it through EdXposed Manager-> download-> device id masker lite, and immediately pay for Pro.
Device Emulator pro- the same as above, but there are a couple of points that are not in the masker.
(https://4pda.ru/forum/index.php?showtopic=603033&st=560 version 3.43. The menu should contain items Advertising ID and GSF)
Socks-Droid (purple background and white key) - change ip and dns. (Downloading from Google)
ccleaner I think he knows everything, it is convenient to clean garbage on the phone (download from gplay)
Device info - shows system hardware identifiers (download from gplay)
Total commander - system file explorer. (Downloading from Google)
RAR - zip manager (download from Google)
RootCloak - hides the root (download from EdXposed)
Download any VPN you love from Google.
Download Firefox from Google. We put the add-ons Cookie Quick Manager (we load cookies through it) and WebRTC Protect, CanvasBlocker (red fingerprint) we put maximum protection in it, AudioContext Fingerptint (gray fingerprint). The browser is ready.
Download APKPure. Search through a search engine. (similar to google play).
App cloner - create clones of applications. (https://w3bsit3-dns.com/forum/index.php?showtopic=728647)
System setup
Let's start with Magisk.
Settings-> Magisk Hide
(Here we shackle root from applications. Installed any app without opening it, first go to magisk hyde and put a checkmark on it, then add cloak to root and add app via add app.)
-> now we first look for Google Play service and put a tick.
Settings-> Restore Magisk manager-> change to any name .-> scroll down and tick magisk hide. We reboot.
This is where the magisk is tuned.
EdXposed
At the entrance, a blue sign should be lit. The framework is active.
Go to EdXposed-> settings-> application list mode turn on the slider-> go back-> go black / white list-> turn on the slider only on Google Play services / blacklist / and that's it.
Go to the Dowanload tab and download the Disable IPv6 module.
Then we go to the modules and put the checkboxes on over all our downloaded applications.
Exposed Mood. We reboot.
We go to the magisk, below the check safety net, click, if everything is green, then I congratulate you your phone is set up and ready to go.
Preparation for work:
1. Go to Device is masker-> random all-> apply all.
2. Device emulator-> check the Android id and google service framework-> change the values.
3. Reboot
4. Connect to wifi / sim
5. In Socks-Droid, enter the sock and dns-> connect The
phone is ready to work. After working out the map / log, we pay the account in the Google settings, clean the date and cache in Google applications, clean the ccleaner phone, change the hardware and work on.
THE ARTICLE MAY HAVE SMALL INACCURACIES.
