We got a Samsung J5 "SM-J510H" which has a password protection in the form of a pin code, with the task to remove this password protection.
For this we will be using Cellebrite UFED Touch 2.
We also need complete cables and adapters:
LET'S START
Launching Cellebrite UFED Touch 2.
We select the item mobile device.
We select the item overview of devices, after which we select the manufacturer.
As we can see, the SM-J510H model was not found, by scientific poking, a profile was chosen for the SM-J510FN model.
Next, select disable / enable user lock.
Select the Remove Screen Lock item.
To ensure a stable power supply, we connect the Phone Power-up Cable to the corresponding contacts on the phone and fix it with tape for reliability, the USB-A plug is connected to the Touch 2 technological connector for power supply.
We get about the following picture.
Then we transfer the smartphone to Download mode, press and hold the 3 keys to decrease the volume, return to the main screen and power until we see such a picture.
Press the volume up key to continue.
We connect everything in the following order: smartphone - adapter T-100 - A Adapter-USB-Touch 2. ATTENTION it is necessary to connect the smartphone to the Touch 2 to the connector located on the left side.
After everything is connected, we return to the Touch 2 screen and select the continue item. The unlocking process has started, after which the smartphone should reboot.
After the notification appeared, as in the photo above and the smartphone has successfully rebooted, it still has password protection.
We wait a minute, after which we reboot it by holding down the power button and selecting the reboot item.
On Touch 2, select continue.
This completes the unlocking process, password protection is removed.
A source
For this we will be using Cellebrite UFED Touch 2.
We also need complete cables and adapters:
- A Adapter-USB
- T-100
- Phone Power-up Cable (required for stable power during operation)
- T-133 (necessary if there are problems with transferring the smartphone to download mode)
LET'S START
Launching Cellebrite UFED Touch 2.
We select the item mobile device.
We select the item overview of devices, after which we select the manufacturer.
As we can see, the SM-J510H model was not found, by scientific poking, a profile was chosen for the SM-J510FN model.
Next, select disable / enable user lock.
Select the Remove Screen Lock item.
To ensure a stable power supply, we connect the Phone Power-up Cable to the corresponding contacts on the phone and fix it with tape for reliability, the USB-A plug is connected to the Touch 2 technological connector for power supply.
We get about the following picture.
Then we transfer the smartphone to Download mode, press and hold the 3 keys to decrease the volume, return to the main screen and power until we see such a picture.
Press the volume up key to continue.
We connect everything in the following order: smartphone - adapter T-100 - A Adapter-USB-Touch 2. ATTENTION it is necessary to connect the smartphone to the Touch 2 to the connector located on the left side.
After everything is connected, we return to the Touch 2 screen and select the continue item. The unlocking process has started, after which the smartphone should reboot.
After the notification appeared, as in the photo above and the smartphone has successfully rebooted, it still has password protection.
We wait a minute, after which we reboot it by holding down the power button and selecting the reboot item.
On Touch 2, select continue.
This completes the unlocking process, password protection is removed.
A source