Question about cash out ATM with 101 dump, i will try my first attempt

[picapleitos97873]

Hello everyone, as always thank all the participants of this forum and the people who are always responding and helping.

I have used the following post to locate certain ATMs that do not have chip reading. If this method is effective I have several ATMs located that should not have a chip reader in a city 60km from mine.

I have "Msr605x" on order and also a blank card.

I need Omnikey ?

My next step would be to buy 101 dump and try to get money out of an ATM. Before buying a dump I planned to read my own card to clone it, and do the test with my card. What do you think?

I've tried looking for some tutorial on how to clone cards with only 101 dump. But he doesn't find anything, everything he finds is related to 202 dump. Any post that you recommend me to read?

I buy "J2a040 and Unfused" blank card, its okay for my job ?

Finally, some advice with my first attempt ??? Do you think this "trick" to find ATM without a chip reader works?

Thanks, best regards

 

[Cloned Boy]

Hello.
It’s very good that you found ATMs without a chip reader.
If you will not record the EMV chip, then Omnikey is not needed.
If you can read information from your personal card and then write the data to a blank card, then you can do this.
The J2a040 card is suitable for recording 101 dumps, the chip just won’t work in it, but it’s not needed. You will write down all the data on a magnetic stripe.
I wish you successful registration of the card and its subsequent cashing out.

You can find a guide to cloning a card in this topic (use a translator from Russian):
"Recording track1+track2+pin 101 dumps to an empty card"

Please answer the following questions:
1. In which stores will you buy live 101 dumps with pins?
2. How will you check the validity of the dump and the absence of regional blocking?
3. What software will you use to record dumps onto the card?

 

[anvil]

how did it again

 

[anvil]

how did it again

how did it go*

 

[picapleitos97873]

Hello.
It’s very good that you found ATMs without a chip reader.
If you will not record the EMV chip, then Omnikey is not needed.
If you can read information from your personal card and then write the data to a blank card, then you can do this.
The J2a040 card is suitable for recording 101 dumps, the chip just won’t work in it, but it’s not needed. You will write down all the data on a magnetic stripe.
I wish you successful registration of the card and its subsequent cashing out.

You can find a guide to cloning a card in this topic (use a translator from Russian):
"Recording track1+track2+pin 101 dumps to an empty card"

Please answer the following questions:
1. In which stores will you buy live 101 dumps with pins?
2. How will you check the validity of the dump and the absence of regional blocking?
3. What software will you use to record dumps onto the card?

Thanks for your answer.

With the MSX software, I can't read my own card and then clone it?

I am going to study this link using the translator. thank you.

1. I have seen several in the verified sellers section, they range between $30-$50, I don't know if they will work. Any seller recommendations?

2. I don't know how to check if a dump is alive, any advice?

My idea was to look for bins of cards that I have had from other countries that I know do not have a regional block, unless the owner activates it (no one usually activates it).

3. Doesn't the same software that comes with the msx work?

 

[picapleitos97873]

I have translated the post and have read it carefully and several questions have arisen.

1. Should I use EMV software to record my credit cards?? I have read that the ones on the internet now are outdated and I need the emv x2. To only record the magnetic stripe, do I also need the latest EMV software?

2. I have read that no store sells Dump+PIN (they are scammers). So if I can't find a Dump+PIN, it would be impossible for me to withdraw money at an ATM even if I manage to find an ATM without a chip reader?

3. Therefore it is very difficult to do real carding, right? Since it is very difficult to find the EMV software and even more difficult Dump+PIN

 

[DailyPape228]

I have translated the post and have read it carefully and several questions have arisen.

1. Should I use EMV software to record my credit cards?? I have read that the ones on the internet now are outdated and I need the emv x2. To only record the magnetic stripe, do I also need the latest EMV software?

2. I have read that no store sells Dump+PIN (they are scammers). So if I can't find a Dump+PIN, it would be impossible for me to withdraw money at an ATM even if I manage to find an ATM without a chip reader?

3. Therefore it is very difficult to do real carding, right? Since it is very difficult to find the EMV software and even more difficult Dump+PIN

It’s not difficult you just gotta look around.

 

[Carding Forum]

1. I have seen several in the verified sellers section, they range between $30-$50, I don't know if they will work. Any seller recommendations?

2. I don't know how to check if a dump is alive, any advice?

3. Doesn't the same software that comes with the msx work?

1. You can buy dumps in any store that is located in a verified section.

2. The validity of dumps can be checked in a checker that does not kill cards. Choose a store that will have a checker or use a third-party service.

3. Any software that can write dumps to an empty card will do. To find out for sure, check how the included software works.

1. Should I use EMV software to record my credit cards?? I have read that the ones on the internet now are outdated and I need the emv x2. To only record the magnetic stripe, do I also need the latest EMV software?

2. I have read that no store sells Dump+PIN (they are scammers). So if I can't find a Dump+PIN, it would be impossible for me to withdraw money at an ATM even if I manage to find an ATM without a chip reader?

3. Therefore it is very difficult to do real carding, right? Since it is very difficult to find the EMV software and even more difficult Dump+PIN

1. Software X2 EMV v3 2024 is needed to record 201 dumps on blank smart cards with an EMV chip.
To record 101 dumps on a magnetic stripe, you can use free software called cardpeek.

2. It’s difficult to find valid dumps+pins for sale. No one will sell money for money. However, I have seen some trusted sellers sell dump+pin. If they guarantee quality, then you can try to buy from them.
The most important thing is to check the card dump for validity; some stores have an automatic checker that will do this without killing the card.

3. Real caring will seem simple if you have working software and reliable suppliers of dumps+pins.
Equipment for recording a chip and magnetic stripe is easy to buy and does not violate the law.

 

[picapleitos97873]

1. You can buy dumps in any store that is located in a verified section.

2. The validity of dumps can be checked in a checker that does not kill cards. Choose a store that will have a checker or use a third-party service.

3. Any software that can write dumps to an empty card will do. To find out for sure, check how the included software works.


1. Software X2 EMV v3 2024 is needed to record 201 dumps on blank smart cards with an EMV chip.
To record 101 dumps on a magnetic stripe, you can use free software called cardpeek.

2. It’s difficult to find valid dumps+pins for sale. No one will sell money for money. However, I have seen some trusted sellers sell dump+pin. If they guarantee quality, then you can try to buy from them.
The most important thing is to check the card dump for validity; some stores have an automatic checker that will do this without killing the card.

3. Real caring will seem simple if you have working software and reliable suppliers of dumps+pins.
Equipment for recording a chip and magnetic stripe is easy to buy and does not violate the law.

For now I have decided to just clone the magnetic tape.

The hardest part is finding reliable D+Ps. So far I have bought 3 and none of them have worked.

 

[Jefe0913]

For now I have decided to just clone the magnetic tape.

The hardest part is finding reliable D+Ps. So far I have bought 3 and none of them have worked.

Where did you buy from?

 

[picapleitos97873]

Where did you buy from?

I bought 2 dumps from "bigfat" I found them in the verified sellers section. The first dump didn't work, the Dumpis inactive and doesn't allow any transactions at the ATM. The second dump was reported stolen and the ATM kept the card.

I have also bought one from zipshop and the D+P was inactive.

At the moment it is impossible to find a seller that sells working or funded D+Ps.

 

[pauly]

I bought 2 dumps from "bigfat" I found them in the verified sellers section. The first dump didn't work, the Dumpis inactive and doesn't allow any transactions at the ATM. The second dump was reported stolen and the ATM kept the card.

I have also bought one from zipshop and the D+P was inactive.

At the moment it is impossible to find a seller that sells working or funded D+Ps.

you should try going back to those stores and looking for the same cards to see if they are still for sale. maybe they are reselling the same card over and over again. If that is the case it would help us all to know about it.