on the front side
- the "VISA Electron" logo in the form of a blue field with the inscription "VISA Electron" in white letters and a yellow "stroke" between "VISA" and"Electron". The logo is located in the lower or upper right corner of the card;
- the outline of the VISA Electron logo in the form of a continuous frame is microprinted with the inscription "Electron" and a secret alphanumeric code;
- a hologram in the form of a flying pigeon (in most cases absent);
- VISA logo in the form of a three-color flag (blue, white, gold): the white stripe says "VISA". The logo is located in the upper or lower right corner of the card (in most cases it is not present);
- An ultraviolet image of a pigeon is required only if there is a hologram and VISA logo on the front side of the card.
- personal data of the Cardholder (first name, last name), card number and validity period are laser-printed or printed, but not embossed;
- the first four digits of the card number must match the four digits of the bank's BIN printed under the card number.;
- number of card VISA Electron, starting with "4" and consisting either of 16 digits: "4ХХХ XXXX XXXX XXXX", with the last group of numbers must be located above or below the logo (in the case of holograms - the last group of numbers must be holograms), or 8 digits - the first four digits must be typographically printed on the left side of the card (BIN Bank), the last four with printed personalization on the right side of the card above or below the logo, VISA Electron;
text "ELECTRONIC USE ONLY" ("Only electronic usage");
on VISA Electron cards, with the number of 16 digits can simultaneously be missing the personal data of the card Holder (name, surname) and expiry date;
- VISA Electron number of 8 digits may be missing the personal data of the card Holder (name, surname), but the duration should be;
- on the front side can be of the contact group (the so-called chip or smart card), located on the first four numbers of the card;
- can be a photograph of the cardholder and/or copy of his signature.
on the reverse side
- a magnetic stripe soldered into plastic, not glued;
- if there is a contact group (chip or smart card), the signature strip should not go over the area where the contact group is placed;
- the signature panel should have a clear (not erased, not smeared) signature of the Cardholder;
on the signature panel, the text is slanted from the repeated words "VISA", written in blue and gold colors, or from the repeated words "ELECTRON", written in blue, red and gold colors;
- the panel with the Holder's signature can be reproduced as a photocopy;
- in the upper-right corner of the signature panel, three digits of the security code must be printed with an inclination to the left (provided that the full 16-digit card number is available on the front side).
- it is acceptable to place the VISA Electron logo, in this case its dimensions should be half the size of the logo on the front side, if there is no micro border. This logo can only be present on the reverse side if it is not present on the front side;
- there may be a photo of the cardholder and/or a photocopy of their signature.
The following changes have been made for the new design of VISA Electron cards.
on the front side
- VISA ELECTRON logo in the form of a white flag with a blue stripe at the bottom, on which the VISA inscription is located in blue letters, and the ELECTRON inscription is located on the blue stripe. The upper left stylized part of the letter V is colored yellow;
- the logo has an ultraviolet element in the form of the letter V, the upper left colored part of the letter under ultraviolet light is separated from the rest by a gap;
on the reverse side
- on the back of the card there is either a regular magnetic stripe, or a magnetic holographic stripe soldered into plastic, and not pasted on. The stripe contains parallel vertical and horizontal lines, an image of a flying pigeon in three phases of flight, a holographic image of the word VISA inside a circle, and a micro font in the form of a repeating word VISA.
- The magnetic stripe can be located at the top or bottom of the card (on chip cards - only in the upper part).
- the signature strip of the Holder can be standard, or developed by the issuer has a complex pattern in the form of longitudinal stripes of blue, yellow, or white. The standard bar contains text consisting of repeated words that can be seen in ultraviolet light.
- The three-digit CVV2 code can be moved from the field of the signature bar to a specially designated place (next to the signature panel).
- the "VISA Electron" logo in the form of a blue field with the inscription "VISA Electron" in white letters and a yellow "stroke" between "VISA" and"Electron". The logo is located in the lower or upper right corner of the card;
- the outline of the VISA Electron logo in the form of a continuous frame is microprinted with the inscription "Electron" and a secret alphanumeric code;
- a hologram in the form of a flying pigeon (in most cases absent);
- VISA logo in the form of a three-color flag (blue, white, gold): the white stripe says "VISA". The logo is located in the upper or lower right corner of the card (in most cases it is not present);
- An ultraviolet image of a pigeon is required only if there is a hologram and VISA logo on the front side of the card.
- personal data of the Cardholder (first name, last name), card number and validity period are laser-printed or printed, but not embossed;
- the first four digits of the card number must match the four digits of the bank's BIN printed under the card number.;
- number of card VISA Electron, starting with "4" and consisting either of 16 digits: "4ХХХ XXXX XXXX XXXX", with the last group of numbers must be located above or below the logo (in the case of holograms - the last group of numbers must be holograms), or 8 digits - the first four digits must be typographically printed on the left side of the card (BIN Bank), the last four with printed personalization on the right side of the card above or below the logo, VISA Electron;
text "ELECTRONIC USE ONLY" ("Only electronic usage");
on VISA Electron cards, with the number of 16 digits can simultaneously be missing the personal data of the card Holder (name, surname) and expiry date;
- VISA Electron number of 8 digits may be missing the personal data of the card Holder (name, surname), but the duration should be;
- on the front side can be of the contact group (the so-called chip or smart card), located on the first four numbers of the card;
- can be a photograph of the cardholder and/or copy of his signature.
on the reverse side
- a magnetic stripe soldered into plastic, not glued;
- if there is a contact group (chip or smart card), the signature strip should not go over the area where the contact group is placed;
- the signature panel should have a clear (not erased, not smeared) signature of the Cardholder;
on the signature panel, the text is slanted from the repeated words "VISA", written in blue and gold colors, or from the repeated words "ELECTRON", written in blue, red and gold colors;
- the panel with the Holder's signature can be reproduced as a photocopy;
- in the upper-right corner of the signature panel, three digits of the security code must be printed with an inclination to the left (provided that the full 16-digit card number is available on the front side).
- it is acceptable to place the VISA Electron logo, in this case its dimensions should be half the size of the logo on the front side, if there is no micro border. This logo can only be present on the reverse side if it is not present on the front side;
- there may be a photo of the cardholder and/or a photocopy of their signature.
The following changes have been made for the new design of VISA Electron cards.
on the front side
- VISA ELECTRON logo in the form of a white flag with a blue stripe at the bottom, on which the VISA inscription is located in blue letters, and the ELECTRON inscription is located on the blue stripe. The upper left stylized part of the letter V is colored yellow;
- the logo has an ultraviolet element in the form of the letter V, the upper left colored part of the letter under ultraviolet light is separated from the rest by a gap;
on the reverse side
- on the back of the card there is either a regular magnetic stripe, or a magnetic holographic stripe soldered into plastic, and not pasted on. The stripe contains parallel vertical and horizontal lines, an image of a flying pigeon in three phases of flight, a holographic image of the word VISA inside a circle, and a micro font in the form of a repeating word VISA.
- The magnetic stripe can be located at the top or bottom of the card (on chip cards - only in the upper part).
- the signature strip of the Holder can be standard, or developed by the issuer has a complex pattern in the form of longitudinal stripes of blue, yellow, or white. The standard bar contains text consisting of repeated words that can be seen in ultraviolet light.
- The three-digit CVV2 code can be moved from the field of the signature bar to a specially designated place (next to the signature panel).
