===============
Formatting
================
#1. Open jcopEnglish
#2. Inserted your blank (Java Card J2A040 suggested) into your respective card reader.
#3. Click “Delete JCOP Files”
#4. Under “Script Type” select “Debit”
#5. As a final step click on “Format JCOP Chip”
#6. Once done, remove your blank. In this case, we'll be using a "Java Card J2A040” for maximum compatibility.
Format is now complete.
(Use jcopManager to ensure your card is unfused!)
================================
Part One Of The Cloning Process
================================
#1. Open the X2 2021 and click on the “IST Generate” option (top left).
#2. Click on the “Read Card” button (middle bottom).
#3. From the details that appear on the screen “Copy Track 2 Data.”
#4. Click on the “EMV” option (located top left).
#5. Paste that “Track 2” data and replace “D” located in the middle of “Track 2” with “=”
#6. Insert “Card Holders Name” in its field it should be in “LAST NAME FIRST NAME” format (insert capital letters).
#7. In “Application Label Field” insert “Card type” in our case it’s “VISA DEBIT” (insert capital letters).
#8. In “Track 1 Discretion Data”, checkmark the box first then delete the “Default Value” that gets generated, then click on the “IST Generate” tab to copy “Track 1” then go back to the “EMV” tab and insert “Track 1” in its field there.
#9. In the “Credit” field select your card type select “VISA” as our card was VISA (make sure to check track 1 again as changing the value in this section will replace Track 1 with a default value, so if that happens just replace that default value with Track 1 again) and in “Writer” field is “MCR200” as our hardware is MCR200.
#10. In “AID” for “VISA” it’s “31010” for master it’s going to be “41010” so we typed “31010”
#11. In “Country Code” insert your country code, ours is “0840” for the US.
#12. In the “PIN” box insert your “Card/Dump Pin”
#13. In “Currency Code” insert your “Card/Dump Currency Code” for USD its “0840”
#14. ...
For the complete steps send a direct message to me
#25. Now on the same “IST Generate” page, it’s time to click on the “Generate IST” button that
Formatting
================
#1. Open jcopEnglish
#2. Inserted your blank (Java Card J2A040 suggested) into your respective card reader.
#3. Click “Delete JCOP Files”
#4. Under “Script Type” select “Debit”
#5. As a final step click on “Format JCOP Chip”
#6. Once done, remove your blank. In this case, we'll be using a "Java Card J2A040” for maximum compatibility.
Format is now complete.
(Use jcopManager to ensure your card is unfused!)
================================
Part One Of The Cloning Process
================================
#1. Open the X2 2021 and click on the “IST Generate” option (top left).
#2. Click on the “Read Card” button (middle bottom).
#3. From the details that appear on the screen “Copy Track 2 Data.”
#4. Click on the “EMV” option (located top left).
#5. Paste that “Track 2” data and replace “D” located in the middle of “Track 2” with “=”
#6. Insert “Card Holders Name” in its field it should be in “LAST NAME FIRST NAME” format (insert capital letters).
#7. In “Application Label Field” insert “Card type” in our case it’s “VISA DEBIT” (insert capital letters).
#8. In “Track 1 Discretion Data”, checkmark the box first then delete the “Default Value” that gets generated, then click on the “IST Generate” tab to copy “Track 1” then go back to the “EMV” tab and insert “Track 1” in its field there.
#9. In the “Credit” field select your card type select “VISA” as our card was VISA (make sure to check track 1 again as changing the value in this section will replace Track 1 with a default value, so if that happens just replace that default value with Track 1 again) and in “Writer” field is “MCR200” as our hardware is MCR200.
#10. In “AID” for “VISA” it’s “31010” for master it’s going to be “41010” so we typed “31010”
#11. In “Country Code” insert your country code, ours is “0840” for the US.
#12. In the “PIN” box insert your “Card/Dump Pin”
#13. In “Currency Code” insert your “Card/Dump Currency Code” for USD its “0840”
#14. ...
For the complete steps send a direct message to me
#25. Now on the same “IST Generate” page, it’s time to click on the “Generate IST” button that
