Earnings on rented cars

Professor

Professional
Messages
213
Reaction score
22
Points
18
The manual is written for informational purposes!
I will try to describe everything as clearly and briefly as possible, without unnecessary fluff.

General:
- Although the topic is gray or with a shade of gray, there is NO NEED for safety, everything is thought out and everything has been worked out for you. As the manual progresses, I will explain what and how.
We will be getting "GOODIES FROM CARS RENTED FOR A DAY".

We will NOT need:
- Knowledge of "SE"
- Some "special" knowledge and skills, if you are a person, then you can handle it.

We will need:
- Time: from 2 to 4 hours a day, at any free time.
- Age 18+
- Availability of category "B" rights - I think everyone has them, especially the male half.
- Money: from $5 to $20 (you can start with a minimum)
- Resistance 2 Ohm - resistors, 50 pcs. For starters, you can buy them at any electrical store.
- Tools (regular keys for 8, 10, 12,14; Electrical tape; Screwdrivers, etc. ;)- I think everyone has this at home at hand, well, in extreme cases you can buy it - it's all pennies.

Let's go:
And so we begin, as I already said, we will extract from the car "GOODIES" that are hidden inside.
GOODIES are car safety, namely Airbags, pyropatrons. If you do not know what it is, do not worry. We will get them out of the car, getting a profit. It is all inside, so no one will ever know what you got out of this car, and since cars are rented almost every day .... Well, you yourself understand, so everything is safe and simple, and if it were not so, then I would never have taken on this in my life. After I analyzed everything, calculated - we started making money. So let's get started.

Step 1
We are looking for a car rental office, there are a huge number of them in each city, we search and analyze. We choose the cheapest one – we take it. You need to change the offices, you don’t need to contact the same one all the time.
(There are a lot of offices on FB)

Step 2
We arrived, rented a car. (As I already said, don’t be afraid, you can calmly arrange the lease in your name).
And so the GOODIES:
1 – Steering airbag pyropatron (we won’t deliver the parachute itself because it will take a long time).
Cost: from $20 to $50 (depending on the brand)
2 – Passenger airbag cartridge, with basket and parachute.
Cost:
Cartridge from $30 to $70
Basket with airbag from $20 to $50
3 – Cartridge, basket with airbag – driver’s knees. Cartridge: from $30 to $70
Parachute (no need to remove the frame as it mainly holds the insert) $20
Total from one car in the worst case scenario (cheapest implementation) - $50-60
In a normal scenario $80-100.
In a good scenario about $200.
TIP: Look in advance for information about the car (foreign cars), the configuration, and what airbags are there (the steering wheel and passenger are everywhere, knees - depends on the brand or configuration - everything is on the Internet!)

Step 3
So we rented a car - we go and get up in a convenient place.
Let's start with the steering wheel:
- All steering wheels are removed differently, but all the videos on removal are on the Internet.
In the search engine, type "Removing the steering wheel cushion, for example, Toyota Corolla"
Removing the cushion:
After dismantling the cushion:
Unscrew the squib (it is held on by 4 bolts for 8 (usually) Put it aside - 1 is ready, but we have a problem - the Airbag light on the dashboard lights up, since the computer does not see one cushion - for this we need RESISTANCE.
We bite off the chip that goes to the squib - 2 wires are exposed, we close one resistance on them, isolate it well (we look, the airbag should go out), we return everything to its place. Wire.
Or you can insert the resistance like this, but also isolate it well so that it does not fall out.

Step 5
Remove the knee: Unfasten the plastic masks, unscrew the bolts - usually held on 2-3. There will be no difficulties here.
If you have any - google the video by car brand, with a request "Removing knee airbags, Hyundai Solaris (example).
Everything is exactly the same, we take out the parachute, the pyropatron. We return everything to its place.
And we make resistance similarly to the steering airbag!

Step 6
Passenger airbag:
It is not very convenient to get there, but it is still possible - THROUGH THE GLOVE COMPARTMENT.
Everything is the same - we do not know how to remove, we google.
Example of removal:
There is nothing complicated here either, 10 minutes of work. After removing, we look inside - we see a basket with an airbag, it is attached along the contour with bolts, from 2 to 6. We remove the chip, unscrew the basket, take it out and put it away.
Next, WE PUT THE RESISTANCE (AS EVERYWHERE) WE MAKE SURE THAT NOTHING IS BURNING (Airback icon on the dashboard)
We assemble and put everything back in place and so, the car looks like before - nothing has changed, but we have our NICHES.

SALE:
Everything is simple here, options:
1) FB we sell at a standard price. It will definitely not lie for more than a week.
2) To sell right away, we look for a dismantler - we call, we offer, they will take it right away, of course, a little cheaper.
3) In the same way, we look for companies, if there are any in your city that sell this or are engaged in it, they will also take it right away, but also a little cheaper. But you will see the money on the same day.
Well, that's all, good luck to everyone!
 
Top