CarderPlanet
Professional
- Messages
- 2,552
- Reaction score
- 712
- Points
- 83
The whole assembly consists of a laptop + a router.
A laptop performs the software role of a router, and a router is hardware that distributes the Internet via Wi-FI or Ethernet cable
For example, I will take a regular xiaomi nano router (It is small, it can be powered from USB and it distributes the Internet both via Wi-FI and Ethernet cable.)
+ we need an Ethernet cable to connect this router to a laptop
1) standard actions for any router: Press Reset in the router itself to reset everything to factory settings. I will connect via the default Wi-FI network to the point and set the Wi-Fi network name and password.
2) Now I will connect all this to (computer / laptop)
3) Software Part: Software that will distribute (anonymous Internet to our router!)
Double SSH Tunnel Manager
4) Download the Double SSH Tunnel Manager program, unpack and run!
The program will prompt you to install the Virtual Adapter, we agree! after which in the list of adapters you will see something like the following picture.
5) then remove all the checkmarks from these two adapters
6) now we need to combine these 2 adapters into a bridge and configure this bridge by unchecking the boxes from IP4 and IP6
That's all !!! the settings are completed after connecting to the anonymous network, everything will be distributed through our router !!!
Answers on questions:
- The simplest is to connect the TOR network for this, the manager must be connected to the Tor network and you need to point the slider down.
To avoid this, use the AntiPing function
(AntiPing slows down, so don't forget to return the slider to its original position)
- You need to check all the settings again. after which it is imperative to reboot the OS.
That's all, thanks for your attention
A laptop performs the software role of a router, and a router is hardware that distributes the Internet via Wi-FI or Ethernet cable
For example, I will take a regular xiaomi nano router (It is small, it can be powered from USB and it distributes the Internet both via Wi-FI and Ethernet cable.)
+ we need an Ethernet cable to connect this router to a laptop
1) standard actions for any router: Press Reset in the router itself to reset everything to factory settings. I will connect via the default Wi-FI network to the point and set the Wi-Fi network name and password.
2) Now I will connect all this to (computer / laptop)
3) Software Part: Software that will distribute (anonymous Internet to our router!)
Double SSH Tunnel Manager
4) Download the Double SSH Tunnel Manager program, unpack and run!
The program will prompt you to install the Virtual Adapter, we agree! after which in the list of adapters you will see something like the following picture.
5) then remove all the checkmarks from these two adapters
6) now we need to combine these 2 adapters into a bridge and configure this bridge by unchecking the boxes from IP4 and IP6
That's all !!! the settings are completed after connecting to the anonymous network, everything will be distributed through our router !!!
Answers on questions:
- The simplest is to connect the TOR network for this, the manager must be connected to the Tor network and you need to point the slider down.
- You can connect Tor, Socks5, SSH, Socks5 Back-connect, LocalSocks5, ShadowSocks as the first connection, use ssh, socks5 as the second chain.
- Yes. you can ... (for this, use the VPN monitor in the program, you will need to register the IP of your VPN there)
- Any browser out of the box will show the WebRTC of your Socks or SSH.
- Some sites can identify you by time delay example 2ip.ru/privacy/
To avoid this, use the AntiPing function
(AntiPing slows down, so don't forget to return the slider to its original position)
- You need to check all the settings again. after which it is imperative to reboot the OS.
- No, it will not. DNS changes only for your router.
That's all, thanks for your attention
