Assistance with tipping

jamal911 · Oct 5, 2012

Im quite new when it comes to making plastics...I have the manual tipper but i cant seem to get a good tip and i dont understand. i have tried at 100 degrees and holding it down for a bit i get almost nothing. Tried at 150 with a quick press down..only some of the numbers get tipped. Watched a video and buddy said that you wont be good at the beginning but it seems so self explainatory so i dont understand.

Please advise

elcharro · Oct 5, 2012

strange never had that problem with tipper something must be wrong with your heat element I used to run at 98 and it would be ok but for better results I would run it at 110 all the time.
could it be your ribbon?

jamal911 · Oct 5, 2012

are certain ribbons made for different types of materials? maybe it could be that but it does work just doesnt tip everything...

SaizKan224 · Oct 5, 2012

Is your rubber piece attached right to the metal part?

175°C works best for pvc

pocoy0 · Oct 5, 2012

i had the same problem when i was a begginer and i solved it very easy, in the right part of the tipper (assuming you are in front of it and that it is a cheap china shit) there is a part where you graduate how down the tipping base will go when you pull the lever down, most of the time it just go very down and that is why it damages the cards, this and the appropriate heat will make a good tipping, also try to only put the part of the card that needs to be tipped instead of the whole card... hope it helped...

faktory · Oct 6, 2012

Put the temp between 180-190* C, make sure the adjustment bolt is properly aligned. When you pull lever down you'll see the bolt that is being mentioned.

Don-T · Oct 7, 2012

jamal911 said:
Im quite new when it comes to making plastics...I have the manual tipper but i cant seem to get a good tip and i dont understand. i have tried at 100 degrees and holding it down for a bit i get almost nothing. Tried at 150 with a quick press down..only some of the numbers get tipped. Watched a video and buddy said that you wont be good at the beginning but it seems so self explainatory so i dont understand.

Please advise

there should be a layer of some materiel under the heat part i think you forgot to place it on your machine... you should be having that PayPaler with you or else just ask your suplier...

jamal911 · Oct 8, 2012

thank you all for assistance problem solved.....170-190 i found was the best...and the rubber piece was needed lol

Don-T · Oct 8, 2012

jamal911 said:
thank you all for assistance problem solved.....170-190 i found was the best...and the rubber piece was needed lol

yea bro u need a condom while you fuck a dirty ass bitch...

Tracksdon · Oct 8, 2012

I need Emboser please anywho who know Good seller that sell PM me

Assistance with tipping

jamal911

Professional

elcharro

Carder

jamal911

Professional

SaizKan224

Professional

jamal911

pocoy0

Professional

faktory

BANNED

Don-T

Carder

jamal911

jamal911

Professional

Realtalk467

Don-T

Carder

Tracksdon

RIPPER

Similar threads